Cisco Systems RJ-45-to-AUX manual 302

[D] Fourth WRITE manager name or IP address

[X]Exit to previous menu

7.At this point you can select option [1] and configure the WRITE community string and change the default community string from “private” to “techwrite,” as we did in the following:

Catalyst 1900 − Network Management (SNMP) WRITE Configuration

—————————————————————— Settings ——————————————————

[1]First WRITE community string

[2]Second WRITE community string

[3]Third WRITE community string

[4]Fourth WRITE community string

[A] First		WRITE manager name or IP address			63.78.39.84
[B] Second		WRITE manager name or IP address
[C]	Third	WRITE	manager	name or IP address
[D]	Fourth WRITE		manager	name or IP address

[X]Exit to previous menu

Enter Selection: 1

This command configures the community string the switch will recognize on all SNMP read/w

Enter WRITE community string:

Current setting ===> private

New setting ===> techwrite

8.Again, once you have entered the new setting, your screen will automatically refresh. At this point, enter option [X] and return to the SNMP configuration menu.

9.At the Network Management (SNMP) Configuration Menu, select [T]. This will allow you to configure the trap message configuration settings:

Catalyst 1900 − Network Management (SNMP) Configuration

[R]READ configuration

[W]WRITE configuration

[T]TRAP configuration

[X]Exit to previous menu

Enter Selection: T

Catalyst 1900 −		Network Management (SNMP) TRAP Configuration
——————————— Settings ——————————————————
[1]	First TRAP community string
[A] First TRAP manager name or IP address
[2]	Second TRAP	community string
[B] Second TRAP		manager name or IP address
[3]	Third TRAP community string
[C] Third TRAP manager name or IP address
[4]	Fourth TRAP	community string
[D] Fourth TRAP		manager name or IP address
[U] Authentication trap generation			Enabled
[L] LinkUp/LinkDown trap generation			Enabled

[X]Exit to previous menu

Enter Selection:

302