Cisco Systems RJ-45-to-AUX manual Configuring VLANs on the Standard Edition IOS, 304

——————————— Actions ———————————————————————————————————

[A] Add ports to capture list

[D]Delete ports from capture list

[X]Exit to Main Menu

Enter Selection: A

This command adds ports to the capture list. Actual monitoring takes place only if all of the following information has been properly configured: 1) the capturing status, 2) the identity of a port to which monitored frames are sent, and 3) a non−empty capture list.

Port numbers should be separated by commas or spaces. A port number range may also be spe

Enter port numbers: ALL

This command enables or disables the monitoring (capturing) of frames from ports that hav

1)the capturing status, 2) the identity of a port to which monitored frames are sent, an

Capturing frames to the Monitor may be [E]nabled or [D]isabled:

Current setting ===> Disabled

New setting ===> Enabled

3.At this point, we want to send the captured information to a specific port. To do so, select [A]. In this example, we have selected trunk port B:

Identify Port: 1 to 12[1−12], [AUI], [A], [B], or [N]one:

Select [1 − 12, AUI, A, B, N]: A

Current setting ===> None

New setting ===> B

4.Now you want to select option [C] and enable “Capturing frames to monitor” to successfully complete the Port Monitoring configuration.

Configuring VLANs on the Standard Edition IOS

To configure VLANs on the Standard Edition IOS, do the following, starting at the Main Menu:

1. Select option [V] to open the Virtual LAN Configuration menu:

Catalyst 1900 − Virtual LAN Configuration

—————————————————————— Information ————————————————————————————————————————————

VTP version: 1

Configuration revision: 0

Maximum VLANs supported locally: 1005

Number of existing VLANs: 5

Configuration last modified by: 63.78.39.164 at 00−00−0000 00:00:00

—————————————————————— Settings ———————————————————————————————————————————————

[N] Domain name		VTPDomain1
[V] VTP mode control		Server
[F]	VTP pruning mode	Enabled
[O]	VTP traps	Enabled

—————————————————————— Actions ————————————————————————————————————————————————

[L] List		VLANs	[A] Add VLAN
[M] Modify VLAN			[D] Delete VLAN
[E]	VLAN	Membership	[S] VLAN Membership Servers
[T]	Trunk Configuration		[W] VTP password

304