Expansion slots

0

0

2

0

Enterprise Edition

Yes

Yes

Yes

Yes

Standard Edition

No

No

No

No

Backplane

1.2Gbps

1.2Gbps

1.2Gbps

24Gbps

Flash

4MB

8MB

12MB

0

RAM

20MB

32MB

64MB

NA

Modularity

No

No

Yes

NA

Forwarding rate

1 million pps

1 million pps

1 million pps

18 million pps

Max VLANs

1,024

1,024

1,024

N/A

Cisco Catalyst 3000

The Cisco Catalyst 3000 has a completely different architecture than any other Cisco switch. However, this series of switches received an End−of−Life (EOL) notice from Cisco, so we will include only a basic overview in this chapter.

The Catalyst 3000 series provides the following features:

Stacked switch platforms that are manageable as if they were a single logical entity. These switches automatically configure themselves as new switches are added or removed.

Cut−through switching technology delivering wire−speed, low−latency switching. The Catalyst 3000 also has the ability to use FragmentFree or Runtless switching, which automatically changes to store−and−forward when an error rate has been exceeded.

Optional modules to provide additional interfaces for more Ethernet ports, Fast Ethernet ports, ATM ports, and WAN connectivity.

User definable per−port and secure−mode filtering that provides access control for sensitive information resources.

Support for up to 64 VLANs using Cisco’s LAN Emulation (LANE)−based ATM, and ISL−based Fast Ethernet VLANs to extend switched VLANs throughout the enterprise.

Spanning−Tree Protocol (STP) implemented by VLAN for loop detection.

An optional stack port interface module that connects one 3000 series switch to another. This Catalyst Matrix delivers 280Mbps per switch of bandwidth for unrestricted traffic flow.

Some of the basic hardware features of the Cisco Catalyst 3000 series of switches are listed in Table E.5.

Table E.5: The key features of the Cisco Catalyst 3000 series switches.

Feature

3000

3100

3200

10BaseT ports

16

24

0

Flex slots

0

1

1

Expansion slots

0

1

7

Max VLANs

1,700

1,700

1,700

Cisco Catalyst 3500 Series XL

The Cisco Systems Catalyst 3500 series XL is a scalable line of stackable 10/100 and Gigabit Ethernet switches. These switches provide high performance and investment protection for companies that are expanding their switched networks. The three major applications for the 3500 series XL are as follows:

In the enterprise wiring closet at the enterprise edge, aggregated to a larger Catalyst switch

In a branch office where it can provide a LAN backbone and desktop connectivity

In a multilayer network where it can be deployed with a Layer 3 switch for a low cost solution

Each Catalyst 3500 XL comes with 2 Gigabit Ethernet interfaces that come with 12, 24, or 48 Gigabit Interface Converter (GBIC) ports and auto−sensing 10BaseT/100BaseTX ports. The 3508G XL provides eight

362

Page 378
Image 378
Cisco Systems RJ-45-to-AUX manual Cisco Catalyst 3500 Series XL, 12MB, 362