Assigning a Static VLAN to an Interface on a 1900EN
Series 156
Configuring Spanning Tree Protocol
To configure Spanning Tree Protocol, start from the Main Menu and do the following:
Select option [N], Network Management.1. From the Network Management menu, select option [B]:
Catalyst 1900 − Network Management
[I] IP Configuration
[S] SNMP Management
[B] Bridge − Spanning Tree
[C] Cisco Discovery Protocol
[G] Cisco Group Management Protocol
[H] HTTP Server Configuration
[R] Cluster Management
[X] Exit to Main Menu
Enter Selection: B
2.
From this menu select option [U] for Uplink Fast. This allows for quick recovery should a root port
fail:
Catalyst 1900 − Bridge − Spanning Tree Configuration
—————————————————————— Information ————————————————————————————————————————
[S] VLAN spanning trees enabled 1−64
—————————————————————— Settings ———————————————————————————————————————————
[U] Uplink Fast Disabled
[R] Uplink Fast Frame Generation rate 15
—————————————————————— Bridge Configuration ———————————————————————————————
[1] Configuration option 1
[2] Configuration option 2
[3] Configuration option 3
[4] Configuration option 4
[O] VLAN bridge operating parameters
—————————————————————— Actions ————————————————————————————————————————————
[E] Enable spanning tree(s) [D] Disable spanning tree(s)
[C] Uplink Fast statistics [X] Exit to previous menu
Enter Selection: U
3.
Select [E] to enable Uplink Fast:
Uplink fast may be [E]nabled or [D]isabled:
Current setting ===> Disabled
New setting ===> Enabled
4.
When you return to the Bridge Configuration menu, you can enable the Spanning Tree Protocol by
selecting [E].
5.
Select the VLAN you want to enable STP on. Notice we selected VLAN 2:
This command enables the Spanning Tree Protocol for a list of VLANs.
You may enable the Spanning Tree Protocol for a list of VLAN numbers.
VLAN numbers range from 1 to 1005.
VLAN numbers should be separated by commas or spaces. A VLAN number range may also be specified. Example: 1, 2, 10−20
Enter VLAN numbers: 2
6.
To disable STP on a particular VLAN, you need to select option [D] from the same menu:7.
307