MLS−RP IP MLS−RP ID Xtag MLS−RP MAC−Vlans
—————————— ———————————— ———— ——————————————————————
38.187.128.254 0000808dca20 2 00−00−80−08−dc−ca 1−20
Displaying MLS VTP Domain Information

To display the MLS VTP domain information, enter the following command:

MLS−RP# show mls rp vtp−domain coriolis
vlan domain name: coriolis
current flow mask: ip−flow
current sequence number: 88452194
current/maximum retry count: 0/10
current domain state: no−change
current/next global purge: false/false
current/next purge count: 0/0
domain uptime: 13:07:36
keepalive timer expires in 8 seconds
retry timer not running
change timer not running
fcp subblock count = 7
1 management interface(s) currently defined:
fastethernet 1/1 on Vlan2
1 mac−vlan(s) configured for multi−layer switching:
mac 00e0.befc.4000
vlan id(s)
2
router currently aware of following 1 switch(es):
switch id 0080.abac.24ec

Related solutions: Found on page:

Configuring VTP on a Set/Clear CLI Switch 164

Configuring VTP on a 1900 Cisco IOS CLI Switch 165

Viewing the MLS VLAN Interface Information

To view the MLS information about specific interfaces, use the show mls rp interface vlan command as

shown here:

MLS−RP# show mls rp interface vlan 2
mls active on Vlan2, domain coriolis
Viewing MLS Statistics on the Catalyst 5000

This command illustrates how to display MLS information on the Catalyst 5000:

CAT5000> (enable) show mls
Multilayer switching enabled
Multilayer switching aging time = 256 seconds
Multilayer switching fast aging time = 0 seconds, packet threshold = 1
Destination−ip flow
Total packets switched = 105483
Active entries = 513
Netflow data export enabled
Netflow data export configured for port 8010 on host 10.1.1.25
Total packets exported = 20
MLS−RP IP MLS−RP ID Xtag MLS−RP MAC−Vlans
—————————— ——————————— ———— ———————————————————————

241