Cisco Systems RJ-45-to-AUX manual Viewing MLS Entries, 242

38.187.128.254 0000808dade0 2 00−00−80−8c−dc−a2 1 38.187.127.254 0000808a22b2 3 00−00−80−8c−dc−a6 2

Viewing MLS Statistics on the Catalyst 6000

On the Catalyst 6000, you can get information similar to that provided by the previous command by entering the following:

CAT6000> (enable) show mls ip
Total Active MLS entries = 0
Total packets		switched = 0
IP Multilayer		switching enabled
IP Multilayer		switching aging time = 256 seconds
IP Multilayer		switching fast aging time = 0
seconds, packet threshold = 0
IP Flow mask: Full Flow
Configured flow mask is Destination flow
Active IP MLS		entries = 0
Netflow Data Export version: 8
Netflow Data Export disabled
Netflow Data Export port/host is not configured
Total packets		exported = 0
MSFC ID	Module XTAG MAC			Vlans
———————————	—————— ———— ————————— ———————————————————————
52.0.03	5	1	01−10−30−7b−0d−00 1,10,22

Viewing MLS Entries

To display all entries in the MLS cache, enter the following command:

CAT5000>(enable) show mls entry
Destination IP Source IP			Port DstPrt SrcPrt			Destination Mac
Vlan Port
—————————————— ————————————			———— —————— ——————			———————————————
MLS−RP 38.187.127.253:
38.187.123.5		38.187.127.254	UDP	6009	69	00−10−0b−16−98−00
1	1/1−2
38.187.123.9		38.187.127.254	UDP	6002	69	00−10−3a−00−a5−09
4/7

242