Cisco Systems RJ-45-to-AUX manual Viewing the VTP Domain Configuration on a Set/Clear IOS, 324

Viewing the VTP Domain Configuration on a Set/Clear IOS

The show vtp domain command can be used to obtain the VTP domain configuration on a Set/Clear command−based IOS switch. Let’s take a look at the command and an example of the output associated with it:

Catalyst5002> (enable) show			vtp domain
Domain Name		Domain Index VTP Version Local Mode Password
————————————————————————— ———————————— ——————————					—————————— ————————
Coriolis		1		1	Server	−
Vlan−count Max−vlan−storage			Config Revision Notifications
——————————	————————————————		—————————————— ————————————
5	1023		0	enabled
Last Updater		V2 Mode Pruning		PruneEligible on Vlans
—————————————— ———————— ———————— ————————————————————————
68.127.187.12		disabled disabled 2−1000

Viewing the VTP Domain Configuration on a CLI−Based IOS

The show vtp command displays the VTP domain configuration on an IOS−based switch. Let’s look at the command, its available options, and an example of its output:

1912EN#show vtp ?

statistics Show VTP statistics

<cr>
1912EN#show vtp
VTP version: 1
Configuration revision:	0
Maximum VLANs supported locally: 1005
Number of existing VLANs:		5
VTP domain name	: coriolis
VTP password	:
VTP operating mode	: Server
VTP pruning mode	: Disabled
VTP traps generation	: Enabled

Configuration last modified by: 63.78.39.33 at 00−00−0000 00:00:00

1912EN#

Viewing the VLAN Configuration on a Set/Clear

Command−Based Switch

To view the VLAN configuration on a Set/Clear command−based IOS switch, use the show vlan command. Several options are available for use with the command that allow you to see only trunked ports, only non−trunked ports, or an individual VLAN number. Let’s look at the command, its optional syntaxes, and an example of its output:

show vlan [vlan] [trunkno trunk]

Catalyst5002> show vlan

Virtual LAN ID: 1

vLAN Trunk Interface: FastEthernet1/0.1

324