Cisco Systems RJ-45-to-AUX manual Viewing the CLI−Based IOS Configuration, 320

set port membership 2/1−24 static set cdp enable 2/1−24

set cdp interval 2/1−24 60

set spantree portfast	2/1−24 disable
set spantree portcost	2/11 10
set spantree portcost	2/12 10
set spantree portcost	2/17 10
set spantree portcost	2/18 10
set spantree portcost	2/19 100
set spantree portcost	2/21 10
set spantree portcost	2/1−10,2/13−16,2/20,2/22−24 19
set spantree portpri	2/1−24 32

!

#switch port analyzer set span enable

!

#cam

set cam agingtime 1−2,10,1003,1005 300

end

Viewing the CLI−Based IOS Configuration

To view the CLI−based IOS configuration, use the show running−config command. Let’s take a look at an example of the output from this command:

1912EN#show running−config Building configuration… Current configuration:

!

!

vtp domain "coriolis"

!

mac−address−table permanent 0030.194C.80A6 Ethernet 0/1 mac−address−table permanent 0000.0C00.4BD0 Ethernet 0/1 mac−address−table permanent 00A0.2457.2877 Ethernet 0/1 mac−address−table permanent 0000.0C33.4283 Ethernet 0/5 mac−address−table permanent 0000.0C33.4283 Ethernet 0/10 mac−address−table permanent 0000.0C33.4286 Ethernet 0/10 tftp server "68.127.186.39"

!

hostname "1912EN"

!

monitor−port monitored 0/1 monitor−port

!

network−port 0/8

!

address−violation ignore

!

multicast−store−and−forward

!

ip default−gateway 63.78.39.254 ip domain−name "rcsis.com"

ip name−server 208.45.228.3 ip name−server 208.45.228.4

!

snmp−server location "Sean’s Lab 1900EN" snmp−server contact "Sean Odom"

!

enable password level 15 "book1"

!

interface Ethernet 0/1

320