Cisco Systems RJ-45-to-AUX Disabling Per−Destination Load Sharing, Viewing Non−CEF Path Packets

show ip cef

Viewing CEF Packet−Dropped Statistics

To view the number of packets dropped from each line card, use the following command:

show cef drop

Viewing Non−CEF Path Packets

To view what packets went to a path other than CEF, use the following command:

show cef not−cef−switched

Disabling Per−Destination Load Sharing

If you want to use per−packet load balancing, you need to disable per−destination load balancing. To disable per−destination load balancing, use this command:

no ip load−sharing per−destination

Viewing the Adjacency Table on the 8500 GSR

The following command allows you to display the adjacency table on the Cisco 8500 GSR:

show adjacency

The following command will allow you to get a more detailed look at the Layer 2 information adjacencies learned by the CEF ASIC:

show adjacency detail

Clearing the Adjacency Table on the 8500 GSR

To clear the adjacency table on a Cisco 8500 GSR, use the following command:

clear adjacency

Enabling Console Session Logging on a Set/Clear Command−Based IOS

Different variations of the set logging command affect session logging differently. To enable session logging for a console session, use the following command:

set logging console enable

83