Cisco Systems CSR 1000V manual Creating a New Destination Profile, 12-9

Chapter 12 Configuring Call Home for the Cisco CSR 1000V

How to Configure Call Home

–For the predefined CiscoTAC-1 profile, you can enable either transport mechanism, but not both.

•Destination address—The actual address related to the transport method by which the alert should be sent.

In this version of the Call Home feature, you can change the destination of the CiscoTAC-1 profile.

•Message formatting—The message format used for sending the alert. The format options for a user-defined destination profile are long-text, short-text, or XML. The default is XML. For the predefined CiscoTAC-1 profile, only XML is allowed.

•Message size—The maximum destination message size. The valid range is 50 to 3,145,728 bytes. The default is 3,145,728 bytes.

•Reporting method—You can choose which data to report for a profile. You can enable reporting of Smart Call Home data.

•Anonymous reporting—You can choose for your customer identity to remain anonymous, and no identifying information is sent.

•Subscribing to interesting alert-groups—You can choose to subscribe to alert-groups highlighting your interests.

This section contains the following subsections:

•Creating a New Destination Profile, page 12-9

•Copying a Destination Profile, page 12-11

•Setting Profiles to Anonymous Mode, page 12-12

Creating a New Destination Profile

To create and configure a new destination profile, perform the following steps:

SUMMARY STEPS

1.configure terminal

2.call-home

3.profile name

4.[no] destination transport method {email http}

5.destination address {email email-addresshttp url}

6.destination preferred-msg-format {long-text short-text xml}

7.destination message-size-limit bytes

8.active

9.end

10.show call-home profile {name all}

	Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07		12-9