4-20
Cisco CSR 1000V Series Cloud Services Router Software Configuration Guide
OL-27477-07
Chapter4 Installing the Cisco CSR 1000V in VMware ESXi Environments
Deploying the Cisco CSR 1000V OVA Template to the VM
Figure4-3 Edit Property Settings Window
Step5 Enter the information to create the new custom property based on a Cisco IOS XE CLI command:
Note Before adding a custom property, make sure that the Cisco IOS XE command that it is based on
is supported on the Cisco CSR 1000V in your release.
a. (Optional) Enter the label. This is a descriptive string for the property.
b. Enter the class ID as “com.cisco.csr1000v”.
c. Assign the property an ID of “ios-config-xxxx” where xxxx is a sequence number from 0001 to 9999
that determines the order in which the custom properties are applied.
d. (Optional) Enter a description for the property.
e. Enter the property type as “string”. This is the only type supported.
f. Enter the default value as the Cisco IOS XE CLI command the custom property is based on.
Step6 When finished, click OK.
Figure 4-4 shows an example of the properties screen after the custom property has been added. The
added custom property is highlighted in the figure.