3Com 5000/6000 manual BGP Protocol view BGP Multicast Address Family view

Page 116

116	3Com Router 5000/6000 Family
	Command Reference

pppoe-client

Use the pppoe-clientcommand to establish a PPPoE session and specify the Dialer Bundle corresponding to the session.

Ethernet Interface (subinterface) view

Virtual Ethernet Interface view

pppoe-server bind virtual-template

Use the pppoe-server bind virtual-templatecommand to enable PPPoE on the virtual-template specified by the Ethernet interface.

Interface view

pppoe-serverlog-information off

Use the pppoe-serverlog-information off command to enable the PPPoE server to output the

PPP-related log information.

System view

pppoe-servermax-sessionslocal-mac

Use the pppoe-servermax-sessionslocal-maccommand to set the maximum number of PPPoE sessions that can be established at a local MAC address.

System view

pppoe-servermax-sessionsremote-mac

Use the pppoe-servermax-sessionsremote-maccommand to set the maximum number of PPPoE sessions that can be established at a peer MAC address.

System view

pppoe-servermax-sessions total

Use the pppoe-servermax-sessions total command to set the maximum number of PPPoE sessions that the system can establish.

System view

pq

Use the pq command to set the queue type of frame relay virtual circuit as Priority Queuing.

Frame Relay Class view

pre-shared-key

Use the pre-shared-keycommand to set the pre-shared key used when a client needs to authenticate a

DVPN server.

Dvpn-Class view

pre-shared-key

Use the pre-shared-keycommand to configure a pre-shared key to be used in IKE negotiation.

IKE-Peer view

preference

Use the preference command to configure the preference of BGP protocol.

BGP Protocol view

BGP Multicast Address Family view

preference

Use the preference command to configure the preference of IS-IS protocol.

IS-IS view

preference

Use the preference command to configure the preference of an OSPF protocol route.

OSPF view

preference

Use the preference command to configure the route preference of RIP.

RIP view

preference clns

Use the preference clns command to set the preference of the CLNS routes discovered by IS-IS protocol.

IS-IS view

pri-set

Use the pri-setcommand to bundle timeslots on the CT1/PRI or CE1/PRI interface into a pri-set.

CE1/PRI Interface view

CT1/PRI Interface view

pri-set (CE1/PRI Interface)

Use the pri-setcommand to have timeslots on the CE1/PRI interface form a pri-set.

CE1/PRI Interface view

Image 116

Contents Router 5642 3C13755 Router 5012 3C13701Router 5232 3C13751 Command Reference 3Com Router 5000/6000 Family3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Route-Policy view Routing Policy viewFrame Relay Class view Ospf view Ospf Area viewVoice Subscriber-line view IS-IS viewOspf view FTP Client viewAsynchronous Serial Interface view AUX Interface view Interface view PVC viewVoice Access-Number view IKE Proposal viewDvpn-Policy view Voice AAA viewGlobal Dhcp Address Pool view Serial Interface viewCE3 interface view Interface view Bridge Template view Synchronous Serial Interface viewInterface view Virtual Template viewEthernet Port view PIM viewPKI Domain view CE1/PRI Interface viewATM E1/T1 Interface view ATM T3 Interface viewUser view Mpls L2VPN viewHunt Group view Isdn BRI Interface viewPolicy view ATM E3/T3 Interface view ATM Master Interface viewCpos Interface view POS Interface viewSynchronous Serial Interface System view PKI Entity viewBGP Unicast view BGP Multicast view VPNv4 view Mpls L2VPN CE viewAsynchronous Serial Interface view AM Interface view Ddns Configuration view PRI and BSV Voice Interface Voice Subscriber Line viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Tunnel Interface view Digital E&M Voice Subscriber-Line viewVpn-Instance view Detect Group view Interface view System viewEthernet Interface or Subinterface view Physical or Dialer Interface view Dialer Interface viewPhysical Interface view Use the dialer enable-circularcommand to enable Circular DCC IMA Group Interface view Vty User Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference IKE Peer view Ospf Protocol viewVoice Number-Substitute view Dtmf threshold SIP Client view Asynchronous Serial Interface viewMR view NetStream Aggregation viewBSV Interface view E1-F Interface view IKE-Peer viewVoIP Voice Entity view Routing Protocol view BGP Unicast view GE Interface view FR Pvc-Group viewFrame Relay Dlci view Frame Relay Interface viewFrame Relay Interface view MFR Interface view Interface view PVC Group viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface 803Com Router 5000/6000 Family Command Reference IPSec Policy view IPSec Policy Template viewUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view DPD Structure view HA-MR viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn Interface view not applicable on BRI Interface Isdn Interface viewIsdn BRI Interface view Isdn PRI Interface view Isdn number-property BRI Interface view Local User view Connection Limit Policy view Pots Voice Entity viewInterface Excluding Logical Interfaces view ATM E1/T1 Interface views AM Interface view AUX Interface view Serial Interface viewMpls view ATM PVC viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view 3Com Router 5000/6000 Family 101 Command Reference Remote-Peer view System view102 3Com Router 5000/6000 Family 103 Command Reference ACL view104 Analog E&M Voice Subscriber Line view 3Com Router 5000/6000 Family 105 Command ReferenceATM Class view PVC view 106 3Com Router 5000/6000 Family 107 Command Reference BGP view VPNv4 view VPN Instance viewBGP view Mbgp IPv4-Family view BGP view Mbgp VPN-Instance Address Family view 3Com Router 5000/6000 Family 109 Command ReferenceBGP view IPv4 Multicast Sub-Address Family view Public Key view BGP view VPNv4 view3Com Router 5000/6000 Family 111 Command Reference BSV Interface view in NTmode112 3Com Router 5000/6000 Family 113 Command Reference BSV Interface view in NT mode Interface view Virtual-Template Interface viewMP-Group Interface view Virtual Template Interface view 3Com Router 5000/6000 Family 115 Command ReferenceDialer Interface view Virtual Template Interface view BGP Protocol view BGP Multicast Address Family view CE1/PRI Interface view CT1/PRI Interface view3Com Router 5000/6000 Family 117 Command Reference VTY Interface viewPublic Key Code view ATM Interface view PVC-Group view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Mbgp VPN-Instance view Manually-Established IPSec Policy view3Com Router 5000/6000 Family 133 Command Reference User-interface view Mseconds3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference FXO Subscriber-Line view Frame Relay Switching viewATM G. Shdsl Interface view 3Com Router 5000/6000 Family 139 Command Reference Analog E&M Voice Subscriber-Line view1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 3Com Router 5000/6000 Family 143 Command Reference Dial Interface viewISP Domain view Local User view 3Com Router 5000/6000 Family 145 Command Reference Any Voice view except for Voice Entity viewVoice Entity View Voice Subscriber-Line view BGP Multicast view BGP Unicast view VPN Instance view146 3Com Router 5000/6000 Family 147 Command Reference User view System view148 3Com Router 5000/6000 Family 149 Command Reference ES-IS view150 3Com Router 5000/6000 Family 151 Command Reference RIP Protocol view RIP Mbgp Address Family view152 SIP Client view Voice Entity view 3Com Router 5000/6000 Family 153 Command ReferenceCard SA Proposal view 154 3Com Router 5000/6000 Family 155 Command Reference Ethernet Interface view Bridge Template view System view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162