3Com 5000/6000 manual Ospf Protocol view, Voice Number-Substitute view, IKE Peer view

Page 63

3Com Router 5000/6000 Family	63
Command Reference

dlsw remote

Use the dlsw remote command to create a remote DLSw peer and specifies its version and filtering rule.

System view

dlsw reverse

Use the dlsw reverse command to convert a MAC address from Ethernet order to token ring order or vice versa.

System view

dlsw timer

Use the dlsw timer command to configure the DLSw timer parameters.

System view

dns domain

Use the dns domain command to configure a DNS domain name.

System view

dns-list

Use the dns-listcommand to configure DNS server IP addresses in a global DHCP address pool.

DHCP Address Pool view

dns-proxy enable

Use the dns-proxy enable command to enable DNS proxy.

System view

dns resolve

Use the dns resolve command to enable DNS resolving.

System view

dns server

Use the dns server command to configure IP address of a DNS server.

System view

domain

Use the domain command to configure an ISP domain or enter the view of an existing ISP domain.

System view

domain-authentication-mode

Use the domain-authentication-modecommand to configure IS-IS route area to authenticate the received

Level-2 routing packets (LSP, CSNP, PSNP), according to the pre-defined mode and password.

IS-IS view

domain-id

Use the domain-idcommand to specify domain ID for a VPN instance.

OSPF Protocol view

domain-name

Use the domain-namecommand to configure the domain name that a global address pool of the DHCP server allocates to clients.

DHCP Address Pool view

dot-match

Use the dot-matchcommand to configure dot match rules of the number-substitute rules.

Voice Number-Substitute view

dpd

Use the dpd command to reference a DPD structure.

IKE Peer view

dscp media

Use the dscp media command to set the DSCP value in the ToS field in the IP packets that carry the RTP stream of the voice entity.

Voice Entity view

dsl link-check

Use the dsl link-check enable command to enable retraining upon detection of a major fault after the

DSL interface comes up.

ATM (G.SHDSL) Interface view

dtmf

Use the dtmf command to configure the way of sending and receiving R2 signaling.

R2 CAS view

dtmf sensitivity-level

Use the dtmf sensitivity-levelcommand to set the detection sensitivity level of DTMF codes.

Voice Subscriber-Line view

Image 63

Contents Router 5012 3C13701 Router 5232 3C13751Router 5642 3C13755 3Com Router 5000/6000 Family Command Reference3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Routing Policy view Route-Policy viewIS-IS view Frame Relay Class viewOspf view Ospf Area view Voice Subscriber-line viewInterface view PVC view Ospf viewFTP Client view Asynchronous Serial Interface view AUX Interface viewVoice AAA view Voice Access-Number viewIKE Proposal view Dvpn-Policy viewSerial Interface view CE3 interface viewGlobal Dhcp Address Pool view Synchronous Serial Interface view Interface view Bridge Template viewPIM view Interface viewVirtual Template view Ethernet Port viewATM T3 Interface view PKI Domain viewCE1/PRI Interface view ATM E1/T1 Interface viewIsdn BRI Interface view User viewMpls L2VPN view Hunt Group viewPolicy view POS Interface view ATM E3/T3 Interface viewATM Master Interface view Cpos Interface viewMpls L2VPN CE view Synchronous Serial Interface System viewPKI Entity view BGP Unicast view BGP Multicast view VPNv4 viewAsynchronous Serial Interface view AM Interface view PRI and BSV Voice Interface Voice Subscriber Line view Ddns Configuration viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Digital E&M Voice Subscriber-Line view Vpn-Instance viewTunnel Interface view Interface view System view Detect Group viewEthernet Interface or Subinterface view Dialer Interface view Physical Interface viewPhysical or Dialer Interface view Use the dialer enable-circularcommand to enable Circular DCC Vty User Interface view IMA Group Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference Ospf Protocol view Voice Number-Substitute viewIKE Peer view Dtmf threshold Asynchronous Serial Interface view SIP Client viewNetStream Aggregation view BSV Interface viewMR view IKE-Peer view VoIP Voice Entity viewE1-F Interface view Routing Protocol view BGP Unicast view Frame Relay Interface view GE Interface viewFR Pvc-Group view Frame Relay Dlci viewInterface view PVC Group view Frame Relay Interface view MFR Interface viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface IPSec Policy view IPSec Policy Template view 803Com Router 5000/6000 Family Command ReferenceUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view HA-MR view DPD Structure viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn Interface view Isdn BRI Interface view Isdn PRI Interface viewIsdn Interface view not applicable on BRI Interface Isdn number-property BRI Interface view Local User view Pots Voice Entity view Connection Limit Policy viewInterface Excluding Logical Interfaces view AM Interface view AUX Interface view Serial Interface view ATM E1/T1 Interface viewsATM PVC view Mpls viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view Remote-Peer view System view 3Com Router 5000/6000 Family 101 Command Reference102 ACL view 3Com Router 5000/6000 Family 103 Command Reference104 3Com Router 5000/6000 Family 105 Command Reference ATM Class view PVC viewAnalog E&M Voice Subscriber Line view 106 BGP view VPNv4 view VPN Instance view 3Com Router 5000/6000 Family 107 Command ReferenceBGP view Mbgp IPv4-Family view 3Com Router 5000/6000 Family 109 Command Reference BGP view IPv4 Multicast Sub-Address Family viewBGP view Mbgp VPN-Instance Address Family view BGP view VPNv4 view Public Key viewBSV Interface view in NTmode 3Com Router 5000/6000 Family 111 Command Reference112 3Com Router 5000/6000 Family 113 Command Reference Interface view Virtual-Template Interface view BSV Interface view in NT mode3Com Router 5000/6000 Family 115 Command Reference Dialer Interface view Virtual Template Interface viewMP-Group Interface view Virtual Template Interface view CE1/PRI Interface view CT1/PRI Interface view BGP Protocol view BGP Multicast Address Family viewVTY Interface view 3Com Router 5000/6000 Family 117 Command ReferenceATM Interface view PVC-Group view Public Key Code view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Manually-Established IPSec Policy view Mbgp VPN-Instance view3Com Router 5000/6000 Family 133 Command Reference Mseconds User-interface view3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference Frame Relay Switching view ATM G. Shdsl Interface viewFXO Subscriber-Line view Analog E&M Voice Subscriber-Line view 3Com Router 5000/6000 Family 139 Command Reference1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 Dial Interface view 3Com Router 5000/6000 Family 143 Command ReferenceISP Domain view Local User view BGP Multicast view BGP Unicast view VPN Instance view 3Com Router 5000/6000 Family 145 Command ReferenceAny Voice view except for Voice Entity view Voice Entity View Voice Subscriber-Line view146 User view System view 3Com Router 5000/6000 Family 147 Command Reference148 ES-IS view 3Com Router 5000/6000 Family 149 Command Reference150 RIP Protocol view RIP Mbgp Address Family view 3Com Router 5000/6000 Family 151 Command Reference152 3Com Router 5000/6000 Family 153 Command Reference Card SA Proposal viewSIP Client view Voice Entity view 154 3Com Router 5000/6000 Family 155 Command Reference System view Bridge Template view Ethernet Interface view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162