3Com Router 5000/6000 Family | 27 |
Command Reference |
|
debugging voice vofr
Use the debugging voice vofr command to enable VoFR module debugging.
User view
debugging voice vpp
Use the debugging voice vpp command to enable the debugging of the VPP module.
User view
debugging voice vpp r2
Use the debugging voice vpp r2 command to enable the debugging between the VPP module and the
R2 module of bottom layer.
User view
debugging vrrp
Use the debugging vrrp command to enable VRRP debugging.
User view
debugging vty
Use the debugging vty command to enable VTY debugging.
User view
debugging web
Use the debugging web
User view
debugging web
Use the debugging web
User view
debugging web
Use the debugging web
User view
debugging x25
Use the debugging x25 command to enable X.25 debugging.
User view
debugging x25 x2t
Use the debugging x25 x2t command to enable X2T debugging.
System view
debugging x25 xot
Use the debugging x25 xot command to enable XOT debugging
User view
default
Use the default command to restore the default of all the R2 configurations and reset the R2 call statistics to 0.
R2 CAS view
default cost
Use the default cost command to configure the default cost for OSPF to redistribute external routes.
OSPF view
Use the
OSPF Area view
default cost
Use the default cost command to configure the default routing cost of a redistributed route.
RIP view
default entity compression
Use the default entity compression command to globally configure the mode of coding and decoding as the default value.
Voice Dial Program view
default entity fax
Use the default entity fax command to set the default fax parameter settings globally.
Voice Dial Program view