3Com manual 3Com Router 5000/6000 Family, Command Reference

2	3Com Router 5000/6000 Family
	Command Reference

Displaying Command Parameters

At the prompt, enter the name of the command followed by a space and ?. For example:

<router5000-xx>boot ?

The following parameters are displayed:

attribute-switch	Exchange the file main-attribute and backup-attribute.
boot-loader	Select a file to boot at the next time
bootrom	Update Bootrom
web-package	Set web resource package

To specify boot loader, enter the command as follows:

<router5000-xx>boot boot-loader ?

You only need to enter ? if parameters exist for the command.

Displaying Parent Menus

At the prompt, enter quit.

Displaying the User View Menu

Press <CTRL-Z>.

Obtaining Help

At the prompt, enter ?.

Further Information

For further information about how to use the command line interface, refer to the Command Reference Guide and the Configuration Guide, which are both available as PDF documents on the CD that accompanied the unit.

Commands

l2tp-auto-client enable

Use the l2tp-auto-client enable command to enable the LAC client to set up L2TP tunnel.

Virtual Template Interface view

l2tp enable

Use the l2tp enable command to enable the L2TP function.

System view

l2tp-group

Use the l2tp-groupcommand to create an L2TP group.

System view

l2tpmoreexam enable

Use the l2tpmoreexam enable command to enable the multi-instance function of L2TP.

System view

l2vpn-family

Use the l2vpn-familycommand to create or enter an L2VPN address family view.

BGP view

aaa-client

Use the aaa-clientcommand to enter Voice AAA view.

Voice view