3Com 5000/6000 manual Pvc

Page 72

72	3Com Router 5000/6000 Family
	Command Reference

fr lmi t392dce

Use the fr lmi t392dce command to set T392 parameter at the DCE side.

Interface view

fr lmi type

Use the fr lmi type command to configure the Frame Relay LMI protocol type.

Interface view

fr map bridge

Use the fr map bridge command to add a bridge-set to frame relay map entry.

Interface view

fr map clns

Use the fr map clns command to add an FR mapping for OSI packets.

Interface view

fr map ip

Use the fr map ip command to add an IP address map entry for FR.

Interface view

fr map ipx

Use the fr map ipx command to add an IPX address map entry.

Interface view

fr map ppp interface virtual-template

Use the fr map ppp interface virtual-templatecommand to map the FR DLCI (corresponds to an FR

PVC) to a PPP link, so the PPPoFR link is established, and thus PPP packets can be sent/received on FR

PVC.

Interface view

fr match

Use the fr match command to configure a PVC group to differentiate traffic by the Precedence or DSCP identifier in the TOS field of the IP header.

FR Pvc-Group view

fr mpls-exp

Use the fr mpls-expcommand to configure the PVC to carry packets of the specified priority levels when the EXP identifier in the MPLS packet is used to identify the priority levels of packets.

FR Pvc-Group view

fr pvc-group

Use the fr pvc-groupcommand to create a PVC group.

Interface view

fr pvc-pq

Use the fr pvc-pqcommand to set the queue type of a frame relay interface as PVC PQ (PVC Priority Queuing) and set queue length, i.e. the maximum number of packets that can be held by a queue, for each queue.

Frame Relay Interface view

MFR Interface view

fr pvc-protect

Use the fr pvc-protectcommand to configure the protection mode for a PVC in a PVC group.

FR Pvc-Group view

fr switch

Use the fr switch command to create a PVC used for frame relay switching and enter frame relay switching view.

System view

fr switching

Use the fr switching command to enable frame relay PVC switching.

System view

fr traffic-policing

Use the fr traffic-policingcommand to enable FRTP function.

Frame Relay Interface view

MFR Interface view

fr traffic-shaping

Use the fr traffic-shapingcommand to enable FRTS function.

Frame Relay Interface view

MFR Interface view

Image 72

Contents Router 5012 3C13701 Router 5232 3C13751Router 5642 3C13755 Command Reference 3Com Router 5000/6000 Family3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Route-Policy view Routing Policy viewFrame Relay Class view Ospf view Ospf Area viewVoice Subscriber-line view IS-IS viewOspf view FTP Client viewAsynchronous Serial Interface view AUX Interface view Interface view PVC viewVoice Access-Number view IKE Proposal viewDvpn-Policy view Voice AAA viewSerial Interface view CE3 interface viewGlobal Dhcp Address Pool view Interface view Bridge Template view Synchronous Serial Interface viewInterface view Virtual Template viewEthernet Port view PIM viewPKI Domain view CE1/PRI Interface viewATM E1/T1 Interface view ATM T3 Interface viewUser view Mpls L2VPN viewHunt Group view Isdn BRI Interface viewPolicy view ATM E3/T3 Interface view ATM Master Interface viewCpos Interface view POS Interface viewSynchronous Serial Interface System view PKI Entity viewBGP Unicast view BGP Multicast view VPNv4 view Mpls L2VPN CE viewAsynchronous Serial Interface view AM Interface view Ddns Configuration view PRI and BSV Voice Interface Voice Subscriber Line viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Digital E&M Voice Subscriber-Line view Vpn-Instance viewTunnel Interface view Detect Group view Interface view System viewEthernet Interface or Subinterface view Dialer Interface view Physical Interface viewPhysical or Dialer Interface view Use the dialer enable-circularcommand to enable Circular DCC IMA Group Interface view Vty User Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference Ospf Protocol view Voice Number-Substitute viewIKE Peer view Dtmf threshold SIP Client view Asynchronous Serial Interface viewNetStream Aggregation view BSV Interface viewMR view IKE-Peer view VoIP Voice Entity viewE1-F Interface view Routing Protocol view BGP Unicast view GE Interface view FR Pvc-Group viewFrame Relay Dlci view Frame Relay Interface viewFrame Relay Interface view MFR Interface view Interface view PVC Group viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface 803Com Router 5000/6000 Family Command Reference IPSec Policy view IPSec Policy Template viewUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view DPD Structure view HA-MR viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn Interface view Isdn BRI Interface view Isdn PRI Interface viewIsdn Interface view not applicable on BRI Interface Isdn number-property BRI Interface view Local User view Connection Limit Policy view Pots Voice Entity viewInterface Excluding Logical Interfaces view ATM E1/T1 Interface views AM Interface view AUX Interface view Serial Interface viewMpls view ATM PVC viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view 3Com Router 5000/6000 Family 101 Command Reference Remote-Peer view System view102 3Com Router 5000/6000 Family 103 Command Reference ACL view104 3Com Router 5000/6000 Family 105 Command Reference ATM Class view PVC viewAnalog E&M Voice Subscriber Line view 106 3Com Router 5000/6000 Family 107 Command Reference BGP view VPNv4 view VPN Instance viewBGP view Mbgp IPv4-Family view 3Com Router 5000/6000 Family 109 Command Reference BGP view IPv4 Multicast Sub-Address Family viewBGP view Mbgp VPN-Instance Address Family view Public Key view BGP view VPNv4 view3Com Router 5000/6000 Family 111 Command Reference BSV Interface view in NTmode112 3Com Router 5000/6000 Family 113 Command Reference BSV Interface view in NT mode Interface view Virtual-Template Interface view3Com Router 5000/6000 Family 115 Command Reference Dialer Interface view Virtual Template Interface viewMP-Group Interface view Virtual Template Interface view BGP Protocol view BGP Multicast Address Family view CE1/PRI Interface view CT1/PRI Interface view3Com Router 5000/6000 Family 117 Command Reference VTY Interface viewPublic Key Code view ATM Interface view PVC-Group view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Mbgp VPN-Instance view Manually-Established IPSec Policy view3Com Router 5000/6000 Family 133 Command Reference User-interface view Mseconds3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference Frame Relay Switching view ATM G. Shdsl Interface viewFXO Subscriber-Line view 3Com Router 5000/6000 Family 139 Command Reference Analog E&M Voice Subscriber-Line view1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 3Com Router 5000/6000 Family 143 Command Reference Dial Interface viewISP Domain view Local User view 3Com Router 5000/6000 Family 145 Command Reference Any Voice view except for Voice Entity viewVoice Entity View Voice Subscriber-Line view BGP Multicast view BGP Unicast view VPN Instance view146 3Com Router 5000/6000 Family 147 Command Reference User view System view148 3Com Router 5000/6000 Family 149 Command Reference ES-IS view150 3Com Router 5000/6000 Family 151 Command Reference RIP Protocol view RIP Mbgp Address Family view152 3Com Router 5000/6000 Family 153 Command Reference Card SA Proposal viewSIP Client view Voice Entity view 154 3Com Router 5000/6000 Family 155 Command Reference Ethernet Interface view Bridge Template view System view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162