3Com 5000/6000 manual Wred

Page 158

158	3Com Router 5000/6000 Family
	Command Reference

web url-filter parameter delete

Use the web url-filter parameter delete command to delete a filter keyword previously added.

System view

web url-filter parameter delete-all

Use the web url-filter parameter delete-allcommand to delete all filter keywords.

System view

web url-filter parameter enable

Use the web url-filter parameter enable command to enable URL parameter filtering.

System view

web url-filter parameter load-file

Use the web url-filter parameter load-filecommand to load a URL parameter filtering file.

System view

web url-filter parameter save-file

Use the web url-filter parameter save-filecommand to save a URL parameter filter file.

System view

wfq

Use the wfq command to set the queue type of the VC to be WFQ.

Frame Relay Class view

wildcard-register enable

Use the wildcard-register enable command to enable fuzzy (wildcard) telephone number registration.

SIP Client view

wred

Use the wred command to configure drop mode as weighted random early detection (WRED).

Traffic Behavior view

wred dscp

Use the wred dscp command to set DSCP lower-limit, upper-limit and drop probability denominator of

WRED.

Traffic Behavior view

wred ip-precedence

Use the wred ip-precedencecommand to set precedence lower-limit, upper-limit and drop probability denominator of WRED.

Traffic Behavior view

wred weighting-constant

Use the wred weighting-constantcommand to set exponential for the calculation of average queue length by WRED.

Traffic Behavior view

x25 alias-policy

Use the x25 alias-policycommand to configure the alias of an X.121 address.

Interface view

x25 call-facility

Use the x25 call-facilitycommand to set user options for an X.25 interface. After an option is set, all

X.25 calls from the X.25 interface will carry the relevant information field in call packet.

Interface view

x25 cug-service

Use the x25 cug-servicecommand to enable CUG service and suppression policies.

Interface view

x25 default-protocol

Use the x25 default-protocolcommand to set the default upper-layer protocol carried over X.25 for the

X.25 interface.

Interface view

x25 default-protocol

Use the x25 default-protocolcommand to set the upper layer protocol for an X.25 interface that X.25 protocol carries by default.

Interface view

x25 hunt-group

Use the x25 hunt-groupcommand to create or enter an X.25 hunt group.

System view

Image 158

Contents Router 5642 3C13755 Router 5012 3C13701Router 5232 3C13751 Command Reference 3Com Router 5000/6000 Family3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Route-Policy view Routing Policy viewVoice Subscriber-line view Frame Relay Class viewOspf view Ospf Area view IS-IS viewAsynchronous Serial Interface view AUX Interface view Ospf viewFTP Client view Interface view PVC viewDvpn-Policy view Voice Access-Number viewIKE Proposal view Voice AAA viewGlobal Dhcp Address Pool view Serial Interface viewCE3 interface view Interface view Bridge Template view Synchronous Serial Interface viewEthernet Port view Interface viewVirtual Template view PIM viewATM E1/T1 Interface view PKI Domain viewCE1/PRI Interface view ATM T3 Interface viewHunt Group view User viewMpls L2VPN view Isdn BRI Interface viewPolicy view Cpos Interface view ATM E3/T3 Interface viewATM Master Interface view POS Interface viewBGP Unicast view BGP Multicast view VPNv4 view Synchronous Serial Interface System viewPKI Entity view Mpls L2VPN CE viewAsynchronous Serial Interface view AM Interface view Ddns Configuration view PRI and BSV Voice Interface Voice Subscriber Line viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Tunnel Interface view Digital E&M Voice Subscriber-Line viewVpn-Instance view Detect Group view Interface view System viewEthernet Interface or Subinterface view Physical or Dialer Interface view Dialer Interface viewPhysical Interface view Use the dialer enable-circularcommand to enable Circular DCC IMA Group Interface view Vty User Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference IKE Peer view Ospf Protocol viewVoice Number-Substitute view Dtmf threshold SIP Client view Asynchronous Serial Interface viewMR view NetStream Aggregation viewBSV Interface view E1-F Interface view IKE-Peer viewVoIP Voice Entity view Routing Protocol view BGP Unicast view Frame Relay Dlci view GE Interface viewFR Pvc-Group view Frame Relay Interface viewFrame Relay Interface view MFR Interface view Interface view PVC Group viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface 803Com Router 5000/6000 Family Command Reference IPSec Policy view IPSec Policy Template viewUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view DPD Structure view HA-MR viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn Interface view not applicable on BRI Interface Isdn Interface viewIsdn BRI Interface view Isdn PRI Interface view Isdn number-property BRI Interface view Local User view Connection Limit Policy view Pots Voice Entity viewInterface Excluding Logical Interfaces view ATM E1/T1 Interface views AM Interface view AUX Interface view Serial Interface viewMpls view ATM PVC viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view 3Com Router 5000/6000 Family 101 Command Reference Remote-Peer view System view102 3Com Router 5000/6000 Family 103 Command Reference ACL view104 Analog E&M Voice Subscriber Line view 3Com Router 5000/6000 Family 105 Command ReferenceATM Class view PVC view 106 3Com Router 5000/6000 Family 107 Command Reference BGP view VPNv4 view VPN Instance viewBGP view Mbgp IPv4-Family view BGP view Mbgp VPN-Instance Address Family view 3Com Router 5000/6000 Family 109 Command ReferenceBGP view IPv4 Multicast Sub-Address Family view Public Key view BGP view VPNv4 view3Com Router 5000/6000 Family 111 Command Reference BSV Interface view in NTmode112 3Com Router 5000/6000 Family 113 Command Reference BSV Interface view in NT mode Interface view Virtual-Template Interface viewMP-Group Interface view Virtual Template Interface view 3Com Router 5000/6000 Family 115 Command ReferenceDialer Interface view Virtual Template Interface view BGP Protocol view BGP Multicast Address Family view CE1/PRI Interface view CT1/PRI Interface view3Com Router 5000/6000 Family 117 Command Reference VTY Interface viewPublic Key Code view ATM Interface view PVC-Group view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Mbgp VPN-Instance view Manually-Established IPSec Policy view3Com Router 5000/6000 Family 133 Command Reference User-interface view Mseconds3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference FXO Subscriber-Line view Frame Relay Switching viewATM G. Shdsl Interface view 3Com Router 5000/6000 Family 139 Command Reference Analog E&M Voice Subscriber-Line view1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 3Com Router 5000/6000 Family 143 Command Reference Dial Interface viewISP Domain view Local User view Voice Entity View Voice Subscriber-Line view 3Com Router 5000/6000 Family 145 Command ReferenceAny Voice view except for Voice Entity view BGP Multicast view BGP Unicast view VPN Instance view146 3Com Router 5000/6000 Family 147 Command Reference User view System view148 3Com Router 5000/6000 Family 149 Command Reference ES-IS view150 3Com Router 5000/6000 Family 151 Command Reference RIP Protocol view RIP Mbgp Address Family view152 SIP Client view Voice Entity view 3Com Router 5000/6000 Family 153 Command ReferenceCard SA Proposal view 154 3Com Router 5000/6000 Family 155 Command Reference Ethernet Interface view Bridge Template view System view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162