3Com 5000/6000 manual Detect Group view, Interface view System view

Page 30

30	3Com Router 5000/6000 Family
	Command Reference

destination-ip

Use the destination-ipcommand to configure the destination IP address in the test.

HWPing Test Group view

destination-port

Use the destination-portcommand to configure the destination port in the test.

HWPing Test Group view

detect

Use the detect command to specify ASPF policy for application layer protocols.

ASPF Policy view

detect

Use the detect command to enable data carrier detection as well as level detection on a serial interface.

Asynchronous Serial Interface view

Synchronous Serial Interface view,

detect-ais (CE1/PRI Interface)

Use the detect-aiscommand to enable alarm indication signal (AIS) detect on the CE1/PRI interface.

CE1/PRI Interface view

detect group

Use the detect-groupcommand to create a detect group and enter its view.

System view

detect list

Use the detect-listcommand to add an IP address to the detect group and assign the address a detecting sequence number.

Detect Group view

dh

Use the dh command to select the Diffie-Hellman group for an IKE proposal.

IKE Proposal view

dhcp accounting domain (Interface view)

Use the dhcp server accounting domain command to enable DHCP accounting for addresses from the interface address pool and configure a domain for DHCP accounting.

Interface view

dhcp enable

Use the dhcp enable command to enable DHCP.

System view

dhcp relay information

Use the dhcp relay information enable command to enable the DHCP relay to support option 82 globally.

System view

dhcp relay information strategy

Use the dhcp relay information strategy command to configure a strategy for handling packets with option 82 on the DHCP relay.

System view

dhcp relay release

Use the dhcp relay release command to send an IP address releasing request to a DHCP server via the

DHCP relay.

Interface view

System view

dchp select (Interface view)

Use the dhcp select command in Interface view to select a method for disposing the DHCP packets destined to the local device.

Interface view

dchp select (System view)

Use the dhcp select command in System view to select a method for multiple interfaces in a specified range to dispose the DHCP packets destined to the local device.

System view

dhcp server accounting domain interface (System view)

Use the dhcp server accounting domain interface command to enable DHCP accounting for addresses from the address pools of the specified interfaces and configure a domain for DHCP accounting.

System view

Image 30

Contents Router 5012 3C13701 Router 5232 3C13751Router 5642 3C13755 Command Reference 3Com Router 5000/6000 Family3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Route-Policy view Routing Policy viewVoice Subscriber-line view Frame Relay Class viewOspf view Ospf Area view IS-IS viewAsynchronous Serial Interface view AUX Interface view Ospf viewFTP Client view Interface view PVC viewDvpn-Policy view Voice Access-Number viewIKE Proposal view Voice AAA viewSerial Interface view CE3 interface viewGlobal Dhcp Address Pool view Interface view Bridge Template view Synchronous Serial Interface viewEthernet Port view Interface viewVirtual Template view PIM viewATM E1/T1 Interface view PKI Domain viewCE1/PRI Interface view ATM T3 Interface viewHunt Group view User viewMpls L2VPN view Isdn BRI Interface viewPolicy view Cpos Interface view ATM E3/T3 Interface viewATM Master Interface view POS Interface viewBGP Unicast view BGP Multicast view VPNv4 view Synchronous Serial Interface System viewPKI Entity view Mpls L2VPN CE viewAsynchronous Serial Interface view AM Interface view Ddns Configuration view PRI and BSV Voice Interface Voice Subscriber Line viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Digital E&M Voice Subscriber-Line view Vpn-Instance viewTunnel Interface view Detect Group view Interface view System viewEthernet Interface or Subinterface view Dialer Interface view Physical Interface viewPhysical or Dialer Interface view Use the dialer enable-circularcommand to enable Circular DCC IMA Group Interface view Vty User Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference Ospf Protocol view Voice Number-Substitute viewIKE Peer view Dtmf threshold SIP Client view Asynchronous Serial Interface viewNetStream Aggregation view BSV Interface viewMR view IKE-Peer view VoIP Voice Entity viewE1-F Interface view Routing Protocol view BGP Unicast view Frame Relay Dlci view GE Interface viewFR Pvc-Group view Frame Relay Interface viewFrame Relay Interface view MFR Interface view Interface view PVC Group viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface 803Com Router 5000/6000 Family Command Reference IPSec Policy view IPSec Policy Template viewUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view DPD Structure view HA-MR viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn Interface view Isdn BRI Interface view Isdn PRI Interface viewIsdn Interface view not applicable on BRI Interface Isdn number-property BRI Interface view Local User view Connection Limit Policy view Pots Voice Entity viewInterface Excluding Logical Interfaces view ATM E1/T1 Interface views AM Interface view AUX Interface view Serial Interface viewMpls view ATM PVC viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view 3Com Router 5000/6000 Family 101 Command Reference Remote-Peer view System view102 3Com Router 5000/6000 Family 103 Command Reference ACL view104 3Com Router 5000/6000 Family 105 Command Reference ATM Class view PVC viewAnalog E&M Voice Subscriber Line view 106 3Com Router 5000/6000 Family 107 Command Reference BGP view VPNv4 view VPN Instance viewBGP view Mbgp IPv4-Family view 3Com Router 5000/6000 Family 109 Command Reference BGP view IPv4 Multicast Sub-Address Family viewBGP view Mbgp VPN-Instance Address Family view Public Key view BGP view VPNv4 view3Com Router 5000/6000 Family 111 Command Reference BSV Interface view in NTmode112 3Com Router 5000/6000 Family 113 Command Reference BSV Interface view in NT mode Interface view Virtual-Template Interface view3Com Router 5000/6000 Family 115 Command Reference Dialer Interface view Virtual Template Interface viewMP-Group Interface view Virtual Template Interface view BGP Protocol view BGP Multicast Address Family view CE1/PRI Interface view CT1/PRI Interface view3Com Router 5000/6000 Family 117 Command Reference VTY Interface viewPublic Key Code view ATM Interface view PVC-Group view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Mbgp VPN-Instance view Manually-Established IPSec Policy view3Com Router 5000/6000 Family 133 Command Reference User-interface view Mseconds3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference Frame Relay Switching view ATM G. Shdsl Interface viewFXO Subscriber-Line view 3Com Router 5000/6000 Family 139 Command Reference Analog E&M Voice Subscriber-Line view1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 3Com Router 5000/6000 Family 143 Command Reference Dial Interface viewISP Domain view Local User view Voice Entity View Voice Subscriber-Line view 3Com Router 5000/6000 Family 145 Command ReferenceAny Voice view except for Voice Entity view BGP Multicast view BGP Unicast view VPN Instance view146 3Com Router 5000/6000 Family 147 Command Reference User view System view148 3Com Router 5000/6000 Family 149 Command Reference ES-IS view150 3Com Router 5000/6000 Family 151 Command Reference RIP Protocol view RIP Mbgp Address Family view152 3Com Router 5000/6000 Family 153 Command Reference Card SA Proposal viewSIP Client view Voice Entity view 154 3Com Router 5000/6000 Family 155 Command Reference Ethernet Interface view Bridge Template view System view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162