3Com manual 3Com Router 5000/6000 Family 121 Command Reference, Voice GK Client view

Page 121

3Com Router 5000/6000 Family

121

Command Reference

 

radius scheme

Use the radius scheme command to configure a RADIUS scheme and enter its view.

System view

radius trap

Use the radius trap command to enable the RADIUS server to send traps when it goes down.

System view

ras-on

Use the ras-oncommand to enable the GK Client function.

Voice GK Client view

re-answer

Use the re-answercommand to enable or disable the originating point to support re-answer signal process.

R2 CAS view

re-authentication

Use the re-authenticationcommand to enable console login re-authentication.

User Interface view

reboot

Use the reboot command to have the router reboot.

User view

receive gain

Use the receive gain command to configure the gain value at the voice subscriber-line input end.

Voice Subscriber-Line view

redialtimes

Use the redialtimes command to configure the number of times of dialing in each dialing phase for a certain access service number.

Voice Access-Number view

redirect bind vpn-instance

Use the redirect bind vpn-instancecommand to bind a VPN instance to the user interface.

User Interface view

redirect disconnect

Use the redirect disconnect command to disconnect a redirected telnet connection manually.

User Interface view

redirect enable

Use the redirect enable command to enable redirect on the asynchronous serial interface.

User Interface view

redirect listen-port

Use the redirect listen-portcommand to specify a port to listen for redirected Telnet connections.

User Interface view

redirect refuse-negotiation

Use the redirect refuse-negotiationcommand to disable Telnet option negotiation during setup of redirected Telnet connection.

User Interface view

redirect return-dealfrom-telnet

Use the redirect return-dealfrom-telnetcommand to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the Telnet client.

User Interface view

redirect return-dealfrom-terminal

Use the redirect return-dealfrom-terminalcommand to have the router that redirects Telnet connection substitute 0x0d for 0x0d 0x0a and 0x0d 0x00, the carriage returns received from the terminal (a PC connected to the console port for example).

User Interface view

redirect timeout

Use the redirect timeout command to specify the amount of time that a redirected Telnet connection can stay idle. After that, the connection is disconnected.

User Interface view

reflect between-clients

Use the reflect between-clientscommand to enable route reflection between clients.

BGP view

VPNv4 view

VPN Instance view

Image 121
Contents Router 5232 3C13751 Router 5012 3C13701Router 5642 3C13755 3Com Router 5000/6000 Family Command Reference3Com Router 5000/6000 Family Command Reference 43Com Router 5000/6000 Family Command Reference Routing Policy view Route-Policy viewOspf view Ospf Area view Frame Relay Class viewVoice Subscriber-line view IS-IS viewFTP Client view Ospf viewAsynchronous Serial Interface view AUX Interface view Interface view PVC viewIKE Proposal view Voice Access-Number viewDvpn-Policy view Voice AAA viewCE3 interface view Serial Interface viewGlobal Dhcp Address Pool view Synchronous Serial Interface view Interface view Bridge Template viewVirtual Template view Interface viewEthernet Port view PIM viewCE1/PRI Interface view PKI Domain viewATM E1/T1 Interface view ATM T3 Interface viewMpls L2VPN view User viewHunt Group view Isdn BRI Interface viewPolicy view ATM Master Interface view ATM E3/T3 Interface viewCpos Interface view POS Interface viewPKI Entity view Synchronous Serial Interface System viewBGP Unicast view BGP Multicast view VPNv4 view Mpls L2VPN CE viewAsynchronous Serial Interface view AM Interface view PRI and BSV Voice Interface Voice Subscriber Line view Ddns Configuration viewUse the debugging command to enable debugging Use the debugging dialer command to enable DCC debugging Use the debugging hwping command to enable HWPing debugging Use the debugging ipsec command to turn IPSec debugging on Use the debugging modem command to enable Modem debugging Any view Use the debugging rsh command to enable RSH debugging Use the debugging voice fax command to enable fax debugging Voice Dial Program view 283Com Router 5000/6000 Family Command Reference Vpn-Instance view Digital E&M Voice Subscriber-Line viewTunnel Interface view Interface view System view Detect Group viewEthernet Interface or Subinterface view Physical Interface view Dialer Interface viewPhysical or Dialer Interface view Use the dialer enable-circularcommand to enable Circular DCC Vty User Interface view IMA Group Interface viewDisplay aspf all 363Com Router 5000/6000 Family Command Reference Display bgp routing community Display bridge spanning tree Display controller cpos e1 Display dhcp relay statistics Display dlsw reachable-cache 423Com Router 5000/6000 Family Command Reference Display fib longer Use the display hwping command, you can view test results Display ike dpd Display interface null Display ip policy Display ip vpn-instance Display isdn parameters Display mac-address Use the display mpls lsp command to view LSP information Display msdp sa-cache Display ospf cumulative Use the display port-mappingcommand to view PAM information Display qos cq interface Display rip interface Display snmp-agent community Display status interface Use the display vlan command to view information on VLANs Display voice entity Display voice voip data-statistic 623Com Router 5000/6000 Family Command Reference Voice Number-Substitute view Ospf Protocol viewIKE Peer view Dtmf threshold Asynchronous Serial Interface view SIP Client viewBSV Interface view NetStream Aggregation viewMR view VoIP Voice Entity view IKE-Peer viewE1-F Interface view Routing Protocol view BGP Unicast view FR Pvc-Group view GE Interface viewFrame Relay Dlci view Frame Relay Interface viewInterface view PVC Group view Frame Relay Interface view MFR Interface viewPVC T1-F Interface view Ft1 clock ARP Use the group command to create a peer group Class view If-match any Use the igmp enable command to enable Igmp on an interface IPSec Policy view IPSec Policy Template view 803Com Router 5000/6000 Family Command ReferenceUse the info-center enable command to enable the info-center Use the interface command to enter Ethernet port view HA-MR view DPD Structure viewInterface or Subinterface view System view NetStream Aggregation view System view ISP Domain view BGP view VPN Instance view Ipx netbios-propagation Isdn BRI Interface view Isdn PRI Interface view Isdn Interface viewIsdn Interface view not applicable on BRI Interface Isdn number-property BRI Interface view Local User view Pots Voice Entity view Connection Limit Policy viewInterface Excluding Logical Interfaces view AM Interface view AUX Interface view Serial Interface view ATM E1/T1 Interface viewsATM PVC view Mpls viewIsis view Use the mobile-ipcommand to enable the MIP function Mobile-ip tunnel path-mtu-discovery Interface view Remote-Peer view Remote-Peer view System view 3Com Router 5000/6000 Family 101 Command Reference102 ACL view 3Com Router 5000/6000 Family 103 Command Reference104 ATM Class view PVC view 3Com Router 5000/6000 Family 105 Command ReferenceAnalog E&M Voice Subscriber Line view 106 BGP view VPNv4 view VPN Instance view 3Com Router 5000/6000 Family 107 Command ReferenceBGP view Mbgp IPv4-Family view BGP view IPv4 Multicast Sub-Address Family view 3Com Router 5000/6000 Family 109 Command ReferenceBGP view Mbgp VPN-Instance Address Family view BGP view VPNv4 view Public Key viewBSV Interface view in NTmode 3Com Router 5000/6000 Family 111 Command Reference112 3Com Router 5000/6000 Family 113 Command Reference Interface view Virtual-Template Interface view BSV Interface view in NT modeDialer Interface view Virtual Template Interface view 3Com Router 5000/6000 Family 115 Command ReferenceMP-Group Interface view Virtual Template Interface view CE1/PRI Interface view CT1/PRI Interface view BGP Protocol view BGP Multicast Address Family viewVTY Interface view 3Com Router 5000/6000 Family 117 Command ReferenceATM Interface view PVC-Group view Public Key Code view3Com Router 5000/6000 Family 119 Command Reference Interface including the MFR Interface view 3Com Router 5000/6000 Family 121 Command Reference 122 3Com Router 5000/6000 Family 123 Command Reference 124 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 125 Command Reference 126 3Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 127 Command Reference 128 3Com Router 5000/6000 Family 129 Command Reference All views except User view 3Com Router 5000/6000 Family 131 Command Reference Manually-Established IPSec Policy view Mbgp VPN-Instance view3Com Router 5000/6000 Family 133 Command Reference Mseconds User-interface view3Com Router 5000/6000 Family 135 Command Reference FXS Voice Subscriber-Line View 3Com Router 5000/6000 Family 137 Command Reference ATM G. Shdsl Interface view Frame Relay Switching viewFXO Subscriber-Line view Analog E&M Voice Subscriber-Line view 3Com Router 5000/6000 Family 139 Command Reference1403Com Router 5000/6000 Family Command Reference 3Com Router 5000/6000 Family 141 Command Reference 142 Dial Interface view 3Com Router 5000/6000 Family 143 Command ReferenceISP Domain view Local User view Any Voice view except for Voice Entity view 3Com Router 5000/6000 Family 145 Command ReferenceVoice Entity View Voice Subscriber-Line view BGP Multicast view BGP Unicast view VPN Instance view146 User view System view 3Com Router 5000/6000 Family 147 Command Reference148 ES-IS view 3Com Router 5000/6000 Family 149 Command Reference150 RIP Protocol view RIP Mbgp Address Family view 3Com Router 5000/6000 Family 151 Command Reference152 Card SA Proposal view 3Com Router 5000/6000 Family 153 Command ReferenceSIP Client view Voice Entity view 154 3Com Router 5000/6000 Family 155 Command Reference System view Bridge Template view Ethernet Interface view Bridge Template view3Com Router 5000/6000 Family 157 Command Reference Wred 3Com Router 5000/6000 Family 159 Command Reference System view Dlci view 3Com Router 5000/6000 Family 161 Command Reference 162