Allied Telesis AT-WA1104G-10 manual CR00013494, CR00013543, CR00013635, Maxttl, CR00013637

Features in 291-08

28

CR

Module

Level

Description

AR400

AR7x5

AR7x0S

Rapier i

Rapier w

AT8800-

AT-8600

AT-8700XL

x90048-

AT-9900

AT-9800

CR00013494

IP Gateway

3

Once a default local IP address had been set, it could not be deleted. This

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

was because the default interface does not have an interface number, but

to delete a local interface, the user must specify the interface’s number.

This issue has been resolved, by adding an option called default to the

delete ip local command. To delete the default local interface’s address,

use the command:

delete ip local=default

Note that this resets the interface, including removing its IP address, but

does not remove the interface itself.

CR00013543

DHCP

3

If a user attempted to add a policy option to a DHCP policy by using the set

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

command instead of the add command, then the resulting error message

did not clearly indicate the cause of the error.

For example, entering the command:

set dhcp policy=test arptimeout=234

resulted in the error message:

Error (3070061): ARPTIMEOUT not found.

This issue has been resolved. The error message now reads:

Error (3070279): Option ARPTIMEOUT was not found in policy test or

was not added using the ADD DHCP POLICY command.

CR00013635

Ping,

3

In the set trace command, it was possible to specify a minimum TTL value

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Traceroute

that was higher than the maximum TTL value.

This issue has been resolved. The minttl and maxttl parameter are now

checked to ensure that the value of minttl is less than or equal to the value

of maxttl.

CR00013637

Ping,

3

If the value specified for the minimum time-to-live parameter (minttl) of

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Traceroute

the traceroute command exceeded the value set for the maximum time-

to-live parameter (maxttl), the router or switch would attempt to execute

the trace rather than generate an error message.

This issue has been resolved.

Version 291-10

C613-10488-00 REV G