
Features in | 76 |
Level 4
CR | Module | Level | Description |
CR00004677 | Core | 4 | When the router or switch rebooted, its internal clock lost approximately |
|
|
| 1 second. |
|
|
| This issue has been resolved. The time loss on reboot has been reduced. |
CR00009087 | Core, Utility | 4 | The following issues occurred with the commands show debug active and |
|
|
| disable debug active: |
|
|
| ■ The command did not adequately warn users if an invalid module number had |
|
|
| been entered into the active parameter. |
|
|
| This issue has been resolved. The router or switch now displays an error unless |
|
|
| the value is between 1 and 142. |
|
|
| ■ The CLI “?” help description for the active parameter listed an incorrect |
|
|
| number range and also listed modules that cannot be manipulated through |
|
|
| this command. |
|
|
| This issue has been resolved. The “?” help description is now correct. |
CR00011695 | QoS | 4 | The “?” help description for switch commands that accept a value in bytes (or |
|
|
| similar units such as kbytes or bytes/s) incorrectly indicated that the units were |
|
|
| bps. The commands this issue applied to depend on the switch model, but |
|
|
| include commands such as: |
|
|
| create qos trafficclass=value maxburst=? |
|
|
| create qos policy=value dtcmaxburst=? |
|
|
| set qos red=value start1=? |
|
|
| set swi port=value bcl=? |
|
|
| set swi dlfl=? |
|
|
| This issue has been resolved. The “?” help description now displays the correct |
|
|
| units. |
|
|
|
|
AR400 | AR7x5 | AR7x0S | Rapier i | AT8800- | x90048- | ||||
Y | Y | Y | Y | Y | – | Y | Y | Y | Y |
Y Y Y Y Y Y Y Y Y Y
– – – Y Y Y Y Y Y Y
Version