Allied Telesis AT-WA1104G-10 manual Support for the new Rapier 48w switch

Support for the new Rapier 48w switch 95

Support for the new Rapier 48w switch

The Rapier 48w is a new model in the Rapier Series of layer 3 gigabit and fast Ethernet switches. Its key features are:

■48-port 10BASE-T/100BASE-TX (RJ-45 connectors)

■Two 1000BASE SFP ports

■Two asynchronous serial console ports with DB9 connectors

■One Network Service Module bay, with support for various WAN interface cards

■Auto-negotiating Layer 3 Managed Switch

■Enhanced switching core

■Replaceable air filters and fan-only modules (FOMs) for NEBS applications

Rapier 48w front panel

Rapier 48w L3 Fast Ethernet Switch
																						FAN 1																												FAN 2
NSM
																																																		PORTS 49-50
																																																		L/A
																																																		1000M LINK
																																																		ACT
																																																		SFP
																																																		INSTALLED
																																																		FAULT
									PORTS 1-48																																									CLASS 1
																																																		LASER PRODUCT
				L/A	LINK 100M	ACT	LINK 10M		ACT	D/C	FULL DUP		HALF DUP		COL																																			DO NOT STARE
																																																		INTO BEAM
																																																		STATUS
ASYN0																																																		FAULT
																																																		POWER
																																																		SWAP
																																																		IN
RESET																																																		USE	HOT
ASYN1																																																			SWAP
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40	41	42	43	44	45	46	47	48	49	50	NSM

Rapier 48w rear panel

40-60VDC

4.5A MAX DUAL INPUTS

WARNING

This unit might have more than one power input. To reduce the risk of electric shock, disconnect all power inputs before servicing unit.

FOR CENTRALIZED DC

POWER CONNECTION,

INSTALL ONLY IN A

RESTRICTED AREA.

For more information about the Rapier Series and expansion options, see the Hardware Reference. The Hardware Reference is available from www.alliedtelesis.co.nz/documentation/manuals.html.

Version 291-10

C613-10488-00 REV G