Playback
NOTE
•If an index mark or temp mark is reached when skipping to the beginning of a file during playback, playback starts from the position of the mark. When skipping to the beginning of a file while the voice recorder is
in stop mode, the mark is ignored (☞ P.31).
•If a setting other than [File Skip] is set for [Skip Space], playback starts after the set amount of time has been skipped backwards or forwards. Playback does not skip to the beginning of the file.
Music files
If a music file transferred to the voice recorder is unplayable, check that its sampling rate and bit rate values are within the supported ranges. The sampling rate and bit rate combinations supported for music file playback by the voice recorder are shown below.
File format | Sampling rate | Bit rate | |
| MPEG 1 Layer 3: |
| |
| 32 kHz, |
| |
| 44.1 kHz, |
| |
MP3 format* | 48 kHz | 8 to 320 kbps | |
MPEG 2 Layer 3: | |||
|
| ||
| 16 kHz, |
| |
| 22.05 kHz, |
| |
| 24 kHz |
| |
| 8 kHz, |
| |
| 11 kHz, |
| |
WMA format | 16 kHz, |
| |
22 kHz, | 5 to 320 kbps |
32kHz, 44.1 kHz,
48kHz
*
3
Playback
•MP3 files with variable bit rates (bit rates converted variably in a single file) may not play normally.
•Even if the file formats is compatible for playback on this recorder, the recorder does not support every encoder.
EN
27