Olympus VN-721PC Recording menu Rec Menu, Reducing noise during recording Low Cut Filter

Recording menu [Rec Menu]

Reducing noise during recording [Low Cut Filter]

The voice recorder’s low cut filter function lets you make recordings that reduce humming sounds from air-conditioners or low-frequency sounds from equipment such as projectors.

[On]:

Turns the low cut filter on. [Off]:

Turns the low cut filter off.

Adjusting the voice activation level for voice-activated recording

1Press the REC (s) button to start recording.

•Recording pauses automatically about 1 second after the input sound becomes quieter than the set activation sensitivity.

The blinking message [Standby] appears in the display. The LED indicator light becomes lit when recording is activated and flashes when recording is paused.

4

Recording

Voice-activated recording function [VCVA]

The voice-activated recording function (VCVA) automatically starts recording when a sound louder than a preset voice activation level is detected, and automatically pauses recording when the sound volume level falls. Use this function to automatically omit unneeded quiet segments when recording (such as long silences during conferences), saving memory.

[On]:

Turns VCVA on. You can adjust the voice activation level used for VCVA.

[Off]:

Turns VCVA off. Restores standard recording.

2Press the 9or 0button to adjust the voice activation level.

a

b

aVoice activation level (moves left/ right to match set level)

bLevel meter (changes in proportion to recording sound volume)

•The setting can be adjusted to between [01] and [15].

menu [Rec Menu]

EN

39