Recording menu [Rec Menu]
Adjusting the voice sync level for voice sync recording
1Press the REC (s) button to prepare for recording.
2Press the 9or 0button to adjust the voice sync level.
a
aVoice sync level (moves left/right to match set level)
•The voice sync level can be adjusted to a setting between [01] and [15].
•Increasing the setting number increases the activation sensitivity, enabling quieter sounds to activate the start of recording.
TIP
•The voice recorder automatically ends recording and returns to recording standby mode when the input sound has been below the voice sync level for at least the set detection time. Each time the voice recorder enters standby mode, the current file is closed. Recording continues in a new file the next time sound is detected.
•Press the STOP (4) button to end a voice sync recording session.
NOTE
•The following function is disabled when using the
•[Rec Scene] (☞ P.23)
•[VCVA] (☞ P.39)
4
Recording menu [Rec Menu]
3Press the REC (s) button again.
•The blinking message [Standby] appears in the display, and the LED indicator light flashes.
•Recording starts automatically if the input is louder than the voice sync level.
EN
41