Kenwood TS-870S Menu Setup, What is a MENU?, Menu Access, Temporary Menu Resetting

Page 30

MENU SETUP

WHAT IS A MENU?

Many functions on this transceiver are selected or configured via a software-controlled Menu instead of physical controls on the transceiver. Once familiar with the Menu system, you will appreciate the versatility it offers. No longer is the number and complexity of features restricted by the physical controls and switches on the Front Panel.

MENU ACCESS

The following procedure explains how to check or change any of the Menu items.

1Press [MENU].

2Turn the M.CH/VFO.CH control to select the desired Menu No.

3Press [UP], or [DOWN], or Mic [UP], or Mic [DWN] to change the current selection for this Menu item.

4Press [MENU] or [CLR] to exit Menu mode.

If the power is switched OFF before this step is completed, the selection just made will be canceled.

MENU A/ MENU B

The TS-870S has two menus. These menus are called Menu A and Menu B. The menus contain identical functions; however, each menu can be configured independently.

For example, you may enjoy two different kinds of operating activities but you like to configure the transceiver differently for each activity. Menu A could be configured with one set of transmit signal characteristics, DSP settings, programmable buttons, frequency steps, etc. Menu B could be configured completely differently. By switching from Menu A to Menu B, you could instantly change Menu configuration and button assignment to suit your current operating style. Or, two operators may share a single transceiver. By dedicating one Menu per operator, each would always enjoy the best configuration.

With a little thought, you can determine the best setups for each Menu for your personal situation. Once you’ve decided your strategy, select via Menu No. 00 (MENU.A/B) the Menu that you want to set up first. Then use the information in this chapter and on the referenced pages to configure your ultimate operating environments.

QUICK MENU FUNCTION

The Quick Menu function complements the Menu A/B selection capability by allowing you to create your own customized but abbreviated Menu. Copying Menu items to the Quick Menu has no effect on the Menu. You should add only those Menu items to the Quick Menu that you use frequently.

Programming the Quick Menu

1 Press [MENU].

2 Turn the M.CH/VFO.CH control to select the desired Menu No.

3 To add the selected Menu item to the Quick Menu, press [M.IN].

The star lights indicating that the item has been added to the Quick Menu.

AGC AUTO

MENU

 

A

B

Each press of [M.IN] toggles the item into or out of the Quick Menu.

4 Press [MENU] or [CLR] to exit Menu mode.

Using the Quick Menu

1 Press [MENU].

2 Press [1MHz].

• “MHz” lights.

AGC AUTO

MENU

 

A

B

 

MHz

3Turn the M.CH/VFO.CH control to select the desired Quick Menu No.

If the Quick Menu has not been programmed yet (see previous section), then turning the M.CH/VFO.CH control causes an alarm to be emitted (either “CHECK” in Morse code or a triple beep).

4Press [UP], or [DOWN], or Mic [UP], or

Mic [DWN] to change the current selection for this Quick Menu item.

5Press [MENU] or [CLR] to exit Quick Menu mode.

TEMPORARY MENU RESETTING

This convenient function allows you to temporarily reset all Menu items to their factory default selections. This can be useful to verify whether a Menu setting is causing undesirable operation.

1Press [CLR]+[] to temporarily reset all Menu items to factory default values.

• The “MENU” indicator flashes.

2To change all Menu items back to your own programmed values, switch OFF the transceiver, then switch it back ON.

24

Image 30
Contents TS-870S Applicable Model Writing Conventions FollowedKEY2 Power Lines Power SourcesPower Cable Protection CleaningContents Memory Features Rejecting InterferenceScan Installing Options MaintenanceOptional Accessories Specifications AppendicesSupplied Accessories DSP Maximum SIGNAL/ Minimum NoiseFeatures IntroductionInstallation Antenna ConnectionTransmission Line MHz 14 MHz 30 MHz Ground Connection DC Power Supply ConnectionInstallation Lightning ProtectionAccessory Connections Front PanelRear Panel Linear Amplifier Remote Computer Interface COMRtty Equipment Rtty and ACC Pin FunctionAccessory Equipment ACC Antenna Tuner ATSM-230 Station Monitor if OUT PKS Pin No. Pin NameANO GND PSQ Smet PKDYour First QSO First QSO Front Panel Getting Acquainted6KEY Speed control @4QUICK Memo M.IN button@5QUICK Memo MR button LSB/USB button @7Tuning controlEnter button CW/ÐR button#5TX EQ. button #3BEAT Cancel buttonRX M.CH button #6FILTER LO/WIDTH and HI/SHIFT controls$7M.CH/VFO.CH control Microphone$4RIT/XIT control UP/DWN buttonsRear Panel 1PROC Display0AUTO 2MONI8RIT 5MENU7SPLIT 9TONE#4FSK #2ON AIR#3AT Tune #7M.SCRAdjusting Squelch Switching Power ON/OFFAdjusting Volume Operating BasicsSelecting Mode Operating Basics Equalizing VFO Frequencies A=BChanging Bands Operating Basics Fine TuningQuick Changes Changing Step SizesFront Panel Meter Operating Basics Direct Frequency EntryMeter on Transmit Carrier Level Selecting Transmit PowerTransmitting Microphone GainMenu Access Menu SetupWhat is a MENU? Temporary Menu ResettingMenu Item Function Selections Default Menu ConfigurationMenu Setup LO/WIDTH and HI/SHIFT controlsM.CH/VFO.CH control Setting Baud Rate bps Stop Bits Cross Reference for Menu Functions Slow Scan TV/ Facsimile CommunicatingSSB Transmission Sstv FrequenciesCommunicating Switching TX/RX ManuallyCW Transmission TX SIDETONE/ RX Pitch FrequencyFull BREAK-IN Setting Delay TimeCommunicating Semi BREAK-IN CW Reverse ReceiveActivity Consult Function DefaultCommunicating Electronic Keyer KEY Speed controlMultiple-Button Functions Emulation OptionsStoring CW Messages CW Message PlaybackInquiry Functions Inquiry Command DescriptionErasing CW Messages To check an Inquiry function Press CH 3+CHFunction Commands Press CH 1+CHEmbedded Functions Serial Number OptionsOption d Leading Other Nines Press RX B or RX a FM TransmissionFM Repeater Operation Press RX a or RX BSelecting Subtone Frequency Continuous or Burst Subtones?Arrl 10-METER Band Plan AM Transmission Digital OperationRtty Frequency Shift Keying Rtty Frequencies ERROR-CHECKING Modes AMTOR/ PACKET/ PACTOR/ G-TOR/ CloverMode Meaning AmtorSPLIT-FREQUENCY Operation Packet FrequenciesCommunicating TF-SET Transmit Frequency SET Satellite OperationReceiving RIT Receive Incremental TuningOperating Aids AGC Automatic Gain ControlVOX VOICE-OPERATED Transmit XIT Transmit Incremental TuningOperating Aids Transmit InhibitChanging Frequency While Transmitting Mode Transmit Sampling PointOperating Aids Speech Processor SSB/AM Transmit MonitorEqualizing Transmit Audio Changing Transmit BandwidthTransmit Bandshift Microphone AGCUsing Automatic Mode Automatic ModeAutomatic Mode Boundaries Press MENU+Automatic Antenna Tuner Presetting Internal Tuner onlyPreset Bands for Internal Tuner Internal TunerOperating Aids AT-300 External Tuner Optional Communication ParametersMenu No Baud Rate Stop Bits DSP Tools Slope Tuning SSB/AMRejecting Interference If Shift CWAuto Notch SSB CW/FSK/FM Beat Cancel SSB/AMRejecting Interference Adaptive FiltersAIP Advanced Intercept Point Setting Spac TimeNoise Blanker AttenuatorConventional Memory Memory FeaturesConventional or Quick MEMORY? Memory Channel DataSplit-Frequency Channels Memory FeaturesMemory Channel Recall Quick Channel SearchTemporary Frequency Changes Memory TransferMemory Channel Scroll Memory \ VFO TransfersChannel to Channel Transfers Full ResetErasing Memory Channels ChannelMemory Features Storing Scan Limits in CH Programmable VFO FunctionRecalling from Quick Memory Quick MemoryStoring Into Quick Memory Temporary Frequency ChangesScan Hold ScanProgram Scan Confirming START/END LimitsBusy Frequency Stop Memory ScanScan ALL-CHANNEL ScanSetting Scan Speed Memory Channel LockoutOperator Conveniences Microprocessor ResetSwitching ANT 1/ ANT Programmable Function ButtonsBeep Function Operator Conveniences Assigning FunctionsDisplay Dimmer Alarm NotificationSetting UP Quick Data TransferConnections Using Quick TransferOperator Conveniences Transferring DataMessage Playback DRU-3 Digital Recording System OptionalRecording Messages Checking MessagesAltering INTER-MESSAGE Interval VS-2 Voice Synthesizer OptionalContinuous MULTI-CHANNEL Playback Transmitting Messages Manual TX/RXService Note MaintenanceService CleaningInternal Adjustments MaintenanceReference Frequency Calibration Troubleshooting Problem Symptom Probable Cause Corrective ActionPress LSB/USB, CW/-R,FSK/-R, or SWR PC-1A Optional AccessoriesDRU-3 PG-2ZVS-2 Voice Synthesizer Unit Installing OptionsRemoving the Case DRU-3 Digital Recording UnitInstalling Options SO-2 TEMPERATURE-COMPENSATED Crystal Oscillator TcxoSpecifications FSK, FMSpecifications FSK, AMAppendix a Learning about DSP NCDXF/IARU Beacon Network Appendix B PropagationInformation HF BeaconsFreq kHz Call Sign Appendix C General Coverage Receiver for SwlingCommand Description Appendix D COM Connector ProtocolCommands Hardware DescriptionBAD Command Examples Parameter DescriptionParameter Table Terminator Computer Control CommandsTypes of Commands Subtone Table for Format NO.14Error Messages Command USE PrecautionsMenu Selection Table for EX COMMAND, Parameter ParameterMenu Menu Item Reading Command Tables Command TablesBusy ID Identification Set Mixer RA RF Attenuator XIT DRS DSPTOR FSK TOR AGCSstv Rtty SSB Sstv
Related manuals
Manual 28 pages 9.83 Kb Manual 104 pages 31.74 Kb

TS-870S specifications

The Kenwood TS-870S is a distinguished transceiver that stands out in the world of amateur radio, particularly for enthusiasts who seek a blend of advanced technology and user-friendly features. Introduced in the early 1990s, this HF transceiver quickly gained a reputation for its exceptional performance, versatility, and reliability, making it a favorite among operators worldwide.

One of the most noteworthy features of the TS-870S is its direct-sampling technology, which allows for superior signal fidelity and processing. This technology enables the transceiver to operate across a range of 160 meters to 10 meters, catering to both casual and serious operators. Its high-performance 16-bit digital signal processing (DSP) facilitates effective noise reduction and filtering capabilities, enhancing the overall clarity during transmission and reception.

In terms of power, the TS-870S boasts an output of 100 watts, providing ample power for various communication needs. The transceiver is equipped with an automatic antenna tuner, which simplifies the task of matching the antenna to the operating frequency, ensuring optimal performance without the hassle of manual adjustments.

Another significant aspect of the Kenwood TS-870S is its user interface, featuring a large, easy-to-read display, and a logically arranged control layout. This makes it accessible for both novice and experienced operators. The built-in memories allow for quick storage and access to favorite frequencies and settings, enhancing operational efficiency.

The Kenwood TS-870S also includes various advanced features such as an optional 2.4 kHz and 6 kHz roofing filter which provides improved performance in crowded band conditions. The receiver's dual VFOs (Variable Frequency Oscillators) enable simultaneous monitoring of two frequencies, which is particularly useful for operators who need to keep track of multiple signals or engage in cross-band communication.

Apart from its technical specifications, the TS-870S is constructed with durability in mind, ensuring that it can withstand the rigors of frequent use. It supports various operating modes, including SSB, CW, AM, and FM, making it a versatile choice for diverse amateur radio activities.

In conclusion, the Kenwood TS-870S combines advanced technology with user-friendly characteristics, offering amateur radio operators an exceptional tool for communication. With its innovative features, robust performance, and flexibility, it continues to be a respected choice among radio enthusiasts, solidifying its legacy in the realm of amateur radio.