Xilinx ML403 specifications HyperTerminal Parameters

Page 17

Running the Applications

R

Select dynamic_eeprom and right click to build the project. If more than one software project is used, make the unused software projects inactive.

Connect a serial cable to the RS232C port on the ML403 board. Start up a HyperTerminal. Set Bits per second to 9600, Data bits to 8, Parity to None, and Flow Control to None, as shown in Figure 20.

X979_20_012907

Figure 20: HyperTerminal Parameters

From XPS, start XMD and enter rst. Invoke GDB and select Run to start the application as shown in Figure 21. The eeprom.c code written for the ML403 shown in the ﬁgure runs without any modiﬁcations on this reference system.

X979_21_012907

Figure 21: Running dynamic_eeprom in GDB

XAPP979 (v1.0) February 26, 2007

www.xilinx.com

17

Image 17

Contents Included Systems SummaryIntroduction IntroductionIIC Primer Data Transfer on the IIC Bus Reference System Speciﬁcs Reference System SpeciﬁcsOPB IIC Registers ML403 XC4VFX12 Address MapOPB IIC Registers Address OPB IIC Control Register Bits Name DescriptionStatus Register SR Status Register Bit Deﬁnitions Contd Microchip 24LC04 Conﬁguring the OPB IIC Core24LC04 Control Byte Allocation ML40x Schematic for IIC ConnectionsML40x Resistors Expansion Header Fpga IIC Pins TotalPhase Aardvark AdapterAardvark Control Center Software Projects Executing the Reference System from EDKProjects interfacing to Aardvark Adapter Project Running the ApplicationsRunning the Applications HyperTerminal Parameters Run Start → Programs → ChipScope Pro → ChipScope Inserter Using ChipScope with OPB IICInvoke XPS. Run Hardware → Generate Netlist Start → Programs → ChipScope Pro → ChipScope Pro Analyzer Making Net Connections in ChipScope InserterSetting Up the Chipscope Trigger Linux Kernel Linux KernelBSP Settings Connected Peripherals Simulation SimulationOPB IIC Simulation Signal Name FunctionalityComplete Simulation Arbitrartion Lost Test Simulation Arbitration Lost Test Code Simulation with iicAA as Master Test code with iicAA as Master X97934012907 Test Code for Simulation with iic20 as Master History RevisionReferences Revision