BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
10Ch1
3-pin connector for field bus channel 1 connection electrically isolated meets the EMC-andFCC-requirements. Field Bus wiring is described in chapter 5.2 Field Bus Connection (Ch1 / Ch2) on Page 20.
11AC/DC IN 18-24V
Power connector for 18-24V AC (50...60Hz) or 18-24V DC power supplies.
Power consumption is 5VA (connected via 10BaseT, twisted pair) or 12VA (connected via AUI, 10Base5). An external power supply is required. See also chapter 5.1 Power Connection on Page 19.
12RS232
9-pin SUB-D male RS232 connector, electrically isolated, PC pin compatible, protected against spikes.
This interface is used for initial device set-up and requires a standard Null-Modem cable when interfacing to a PC.
13LAN-AUI
15-pin Attachment Unit Interface female Ethernet LAN connector for coaxial or fiber optic linkage (with AUI transceiver).
1410BaseT
10BaseT RJ-45 Ethernet LAN-connector, meets the requirements of ANSI/TIA/EIA 586 Category 5, for unshielded twisted pair connections.
