BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
individually. After having entered all requested information, it will be asked whether to take over the new settings. If this is denied the old settings will be restored. Otherwise, the new settings are stored to the Flash memory and the system needs to be restarted to activate the new settings.
delete deletes basic network settings. Please note that after this operation the BNA device will not operate on the LAN anymore. After commanding delete, new basic network parameters must be entered via modify.
altmac definition of an alternative MAC- address. This command is available only for the sake of completeness. Each BNA already comes with a unique Ethernet address (MAC address). So there will be no need for defining a new MAC address. It is recommended to not use this command unless advised to do so by the Honeywell Technical Assistance Center.
exit exits the
6.5.3dc - Download configuration
The download configuration command dc is used to have a predefined way of retrieving new
33 |