BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
Text Text written with this font shows terminal output.
Note : All BNA Bootloader commands are case- sensitive!
6.5.1Help or ?
Entering help or ? at the BNA bootloader> prompt followed by <Enter> displays all available BNA Bootloader commands.
In each
All command lists can vary between different users. The lists don’t show any commands which a user is not allowed to execute.
6.5.2np - Basic network parameters
The basic network parameters command np is used to define the IP address, the network mask, and the default gateway of the BNA device. This information is normally provided by the local IS department.
np is not a direct command; instead, it provides a
display displays current basic network settings.
modify changes basic network settings. After entering this command each basic network parameter will be queried
32 |