Compaq D300v Series manual Setup Utility Intel Celeron Models, Computer Setup Utilities F10

Page 36

4

Setup Utility (Intel Celeron Models)

Computer Setup Utilities (F10)

Use Computer Setup to do the following:

■Change factory default settings.

■Set the system date and time.

■Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices.

■Modify the boot order of bootable devices such as hard drives, diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120 drives.

■Configure Quiet Drive options (for drives that support this feature).

■Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot.

■Enable or disable Network Server Mode, which allows the computer to boot the operating system when the power-on password is enabled, with or without a keyboard or mouse attached. When attached to the system, the keyboard and mouse remain locked until the power-on password is entered.

■Select Post Messages Enabled or Disabled to change the display status of Power-On Self-Test (POST) messages. Post Messages Disabled suppresses most POST messages, such as memory count, product name, and other non-error text messages. If a POST error occurs, the error is displayed regardless of the mode selected. To manually switch to Post Messages Enabled during POST, press any key (except F1 through F12).

■Establish an Ownership Tag, the text of which is displayed each time the system is turned on or restarted.

Compaq Evo D300v User’s Guide

4-1

Image 36

Contents User’s Guide Page Contents Setup Utility Intel Celeron Models Index Quick Setup Unpack the ComputerConfirm the Voltage Setting Connect External Devices Connect the monitor, mouse, keyboard, and network cablesConnect the Power Cords Front Panel Components Front Panel ComponentsTurning Off the Personal Computer Hardware Upgrades Installation SequenceRemoving the Access Panels Removing the Front Bezel Installing Additional Memory Memory Module Installation Hardware Upgrades Installing or Removing an Expansion Card Removing a 5.25 Inch Drive Hardware Upgrades Removing a Diskette Drive or Hard Drive Removing the Diskette Drive To replace the drive cage, reverse steps Hardware Upgrades Compaq Evo D300 User’s Guide Setup Utility Intel Pentium 4 Models Setup UtilityUsing Setup Utility Start Shut Down Restart the ComputerStandard Cmos Setup Screen Standard Cmos Setup ScreenAdvanced Cmos Setup Screen Advanced Cmos Setup ScreenAdvanced Chipset Setup Screen Advanced Chipset Setup ScreenPower Management Setup Screen Power Management Setup ScreenPCI/Plug and Play Setup Screen PCI/Plug and Play Setup ScreenPeripheral Setup Screen Hardware Monitor Setup ScreenChange User Password Screen Auto-Detect Hard Disks ScreenChange Supervisor Password Screen Auto Configuration with Optimal Settings ScreenSave Settings and Exit Screen Exit Without Saving ScreenSetup Utility Intel Celeron Models Computer Setup Utilities F10Setup Utility Intel Celeron Models Using Computer Setup Utilities ExitComputer Setup Drive Type Emulation Options Multisector Transfers IDE ATA devicesonly Translation Parameters IDE Disks only Primary IDE Controller To boot one time from a device other than Post Disable MBR Security before MBR Security is enabled This option does not affect power management Uuid Universal Unique Identifier Description Computer Setup Computer Setup Battery Replacement Replacing the BatteryBattery and battery holder Lift the battery out of its holder Routine Computer Care and Shipping Preparation Routine Computer CareCD-ROM Drive Precautions CleaningSafety OperationShipping Preparation Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Power Cord Set Requirements Agency Notices Regulatory Compliance Identification NumbersFederal Communications Commission Notice Modifications Mouse Compliance StatementCables Canadian Notice Avis CanadienEuropean Union Notice Japanese Notice Energy Star ComplianceGerman Ergonomics Notice Laser Safety Cdrh RegulationsCompliance with International Regulations Laser Product Label Laser InformationBattery Replacement Notice Index Index-2