Compaq D300v Series manual Multisector Transfers IDE ATA devicesonly

Page 41

Setup Utility (Intel Celeron Models)

Computer Setup (Continued)

Heading	Option	Description
Storage	Device Configuration	Transfer Mode (IDE devices only) Specifies
(continued)	(continued)	the active data transfer mode. Options (subject
		to device capabilities) are PIO 0, Max PIO,
		Enhanced DMA, Ultra DMA 0, and Max UDMA.

		Multisector Transfers (IDE ATA devicesonly)
		Specifies how many sectors are transferred per
		multi-sector PIO operation. Options (subject to
		device capabilities) are Disabled, 8, and 16.

		Quiet Drive (available on select drives only)
		• PerformanceAllows the drive to operate at
		maximum performance.
		• QuietReduces noise from the drive during
		operation. When set to Quiet, the drive will
		not operate at maximum performance.
		If the drive does not support Quiet
		mode, the Quiet Drive option will not be
		displayed.

		Translation Mode (IDE disks only)
		Lets you select the translation mode to be used
		for the device. This enables the BIOS to
		access disks partitioned and formatted on other
		systems and may be necessary for users of
		older versions of UNIX (e.g., SCO UNIX
		version 3.2). Options are Bit-Shift, LBA
		Assisted, User, and None.

Support for Computer Setup options may vary depending on your specific hardware configuration.

4-6	Compaq Evo D300v User’s Guide

Image 41

Contents User’s Guide Page Contents Setup Utility Intel Celeron Models Index Unpack the Computer Quick SetupConfirm the Voltage Setting Connect the monitor, mouse, keyboard, and network cables Connect External DevicesConnect the Power Cords Front Panel Components Front Panel ComponentsTurning Off the Personal Computer Installation Sequence Hardware UpgradesRemoving the Access Panels Removing the Front Bezel Installing Additional Memory Memory Module Installation Hardware Upgrades Installing or Removing an Expansion Card Removing a 5.25 Inch Drive Hardware Upgrades Removing a Diskette Drive or Hard Drive Removing the Diskette Drive To replace the drive cage, reverse steps Hardware Upgrades Compaq Evo D300 User’s Guide Setup Utility Setup Utility Intel Pentium 4 ModelsStart Shut Down Restart the Computer Using Setup UtilityStandard Cmos Setup Screen Standard Cmos Setup ScreenAdvanced Cmos Setup Screen Advanced Cmos Setup ScreenAdvanced Chipset Setup Screen Advanced Chipset Setup ScreenPower Management Setup Screen Power Management Setup ScreenPCI/Plug and Play Setup Screen PCI/Plug and Play Setup ScreenHardware Monitor Setup Screen Peripheral Setup ScreenAuto-Detect Hard Disks Screen Change User Password ScreenAuto Configuration with Optimal Settings Screen Change Supervisor Password ScreenExit Without Saving Screen Save Settings and Exit ScreenComputer Setup Utilities F10 Setup Utility Intel Celeron ModelsSetup Utility Intel Celeron Models Exit Using Computer Setup UtilitiesComputer Setup Drive Type Emulation Options Multisector Transfers IDE ATA devicesonly Translation Parameters IDE Disks only Primary IDE Controller To boot one time from a device other than Post Disable MBR Security before MBR Security is enabled This option does not affect power management Uuid Universal Unique Identifier Description Computer Setup Computer Setup Replacing the Battery Battery ReplacementBattery and battery holder Lift the battery out of its holder Routine Computer Care Routine Computer Care and Shipping PreparationCleaning CD-ROM Drive PrecautionsSafety OperationShipping Preparation Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Power Cord Set Requirements Federal Communications Commission Notice Agency NoticesRegulatory Compliance Identification Numbers Cables ModificationsMouse Compliance Statement Avis Canadien Canadian NoticeJapanese Notice Energy Star Compliance European Union NoticeGerman Ergonomics Notice Compliance with International Regulations Laser SafetyCdrh Regulations Laser Information Laser Product LabelBattery Replacement Notice Index Index-2