Compaq D300v Series manual Using Computer Setup Utilities, Exit

Page 38

Setup Utility (Intel Celeron Models)

Using Computer Setup Utilities

To access the Computer Setup Utilities menu, complete the following steps:

1.Turn on or restart the computer. If you are in Windows, click

Start > Shut Down > Restart the Computer.

2.When the F10 = Setup message appears in the lower-right corner of the screen, press the F10 key.

If you do not press the F10 key while the message is displayed, you must restart the computer again to access the utility.

3.Select your language from the list and press the Enter key.

4.A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security, Power, and Advanced.

5.Use the arrow keys to select the appropriate heading and to select the option you want, then press the Enter key. To return to the Computer Setup Utilities menu, press the Esc key.

6.To apply and save changes, select File > Save Changes and

Exit.

❏If you selected an option that automatically restarted the computer, changes were applied at that time.

❏If you have made changes that you do not want applied, select Ignore Changes and Exit.

❏If you have already applied changes you now want to eliminate, select Set Defaults and Exit. This option will restore the original factory system defaults.

Compaq Evo D300v User’s Guide

4-3

Image 38

Contents User’s Guide Page Contents Setup Utility Intel Celeron Models Index Quick Setup Unpack the ComputerConfirm the Voltage Setting Connect External Devices Connect the monitor, mouse, keyboard, and network cablesConnect the Power Cords Front Panel Components Front Panel ComponentsTurning Off the Personal Computer Hardware Upgrades Installation SequenceRemoving the Access Panels Removing the Front Bezel Installing Additional Memory Memory Module Installation Hardware Upgrades Installing or Removing an Expansion Card Removing a 5.25 Inch Drive Hardware Upgrades Removing a Diskette Drive or Hard Drive Removing the Diskette Drive To replace the drive cage, reverse steps Hardware Upgrades Compaq Evo D300 User’s Guide Setup Utility Intel Pentium 4 Models Setup UtilityUsing Setup Utility Start Shut Down Restart the ComputerStandard Cmos Setup Screen Standard Cmos Setup ScreenAdvanced Cmos Setup Screen Advanced Cmos Setup ScreenAdvanced Chipset Setup Screen Advanced Chipset Setup ScreenPower Management Setup Screen Power Management Setup ScreenPCI/Plug and Play Setup Screen PCI/Plug and Play Setup ScreenPeripheral Setup Screen Hardware Monitor Setup ScreenChange User Password Screen Auto-Detect Hard Disks ScreenChange Supervisor Password Screen Auto Configuration with Optimal Settings ScreenSave Settings and Exit Screen Exit Without Saving ScreenSetup Utility Intel Celeron Models Computer Setup Utilities F10Setup Utility Intel Celeron Models Using Computer Setup Utilities ExitComputer Setup Drive Type Emulation Options Multisector Transfers IDE ATA devicesonly Translation Parameters IDE Disks only Primary IDE Controller To boot one time from a device other than Post Disable MBR Security before MBR Security is enabled This option does not affect power management Uuid Universal Unique Identifier Description Computer Setup Computer Setup Battery Replacement Replacing the BatteryBattery and battery holder Lift the battery out of its holder Routine Computer Care and Shipping Preparation Routine Computer CareSafety CD-ROM Drive PrecautionsCleaning OperationShipping Preparation Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Power Cord Set Requirements Federal Communications Commission Notice Agency NoticesRegulatory Compliance Identification Numbers Cables ModificationsMouse Compliance Statement Canadian Notice Avis CanadienEuropean Union Notice Japanese Notice Energy Star ComplianceGerman Ergonomics Notice Compliance with International Regulations Laser SafetyCdrh Regulations Laser Product Label Laser InformationBattery Replacement Notice Index Index-2