Compaq D300v Series manual Primary IDE Controller

Page 43

Setup Utility (Intel Celeron Models)

Computer Setup (Continued)

Heading	Option	Description
Storage	Options	Primary IDE Controller
(continued)	(continued)	Allows you to enable or disable the primary IDE
		Allows you to enable or disable the primary IDE
		controller.

		Secondary IDE Controller
		Allows you to enable or disable the secondary
		IDE controller.

		Diskette MBR Validation
		Allows you to enable or disable strict validation
		of the diskette Master Boot Record(MBR).
		If you use a bootable diskette image that
		you know to be valid, and it does not
		boot with Diskette MBR Validation
		enabled, you may need to disable this
		option in order to use the diskette.
	IDE DPS Self-Test	Allows you to execute self-tests on IDE hard
		drives capable of performing the Drive
		Protection System (DPS) self-tests.
		This selection will only appear when at
		least one drive capable of performing
		the IDE DPS self-tests is attached to the
		system.

Hard Drive Order

(supported on select models only)

Allows you to specify the order of attached hard drive controllers. The first hard drive controller in the order will have priority in the boot sequence and will be recognized as drive C (if any devices are attached).

Support for Computer Setup options may vary depending on your specific hardware configuration.

4-8	Compaq Evo D300v User’s Guide

Image 43

Contents User’s Guide Page Contents Setup Utility Intel Celeron Models Index Unpack the Computer Quick SetupConfirm the Voltage Setting Connect the monitor, mouse, keyboard, and network cables Connect External DevicesConnect the Power Cords Front Panel Components Front Panel ComponentsTurning Off the Personal Computer Installation Sequence Hardware UpgradesRemoving the Access Panels Removing the Front Bezel Installing Additional Memory Memory Module Installation Hardware Upgrades Installing or Removing an Expansion Card Removing a 5.25 Inch Drive Hardware Upgrades Removing a Diskette Drive or Hard Drive Removing the Diskette Drive To replace the drive cage, reverse steps Hardware Upgrades Compaq Evo D300 User’s Guide Setup Utility Setup Utility Intel Pentium 4 ModelsStart Shut Down Restart the Computer Using Setup UtilityStandard Cmos Setup Screen Standard Cmos Setup ScreenAdvanced Cmos Setup Screen Advanced Cmos Setup ScreenAdvanced Chipset Setup Screen Advanced Chipset Setup ScreenPower Management Setup Screen Power Management Setup ScreenPCI/Plug and Play Setup Screen PCI/Plug and Play Setup ScreenHardware Monitor Setup Screen Peripheral Setup ScreenAuto-Detect Hard Disks Screen Change User Password ScreenAuto Configuration with Optimal Settings Screen Change Supervisor Password ScreenExit Without Saving Screen Save Settings and Exit ScreenComputer Setup Utilities F10 Setup Utility Intel Celeron ModelsSetup Utility Intel Celeron Models Exit Using Computer Setup UtilitiesComputer Setup Drive Type Emulation Options Multisector Transfers IDE ATA devicesonly Translation Parameters IDE Disks only Primary IDE Controller To boot one time from a device other than Post Disable MBR Security before MBR Security is enabled This option does not affect power management Uuid Universal Unique Identifier Description Computer Setup Computer Setup Replacing the Battery Battery ReplacementBattery and battery holder Lift the battery out of its holder Routine Computer Care Routine Computer Care and Shipping PreparationOperation CD-ROM Drive PrecautionsCleaning SafetyShipping Preparation Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Power Cord Set Requirements Regulatory Compliance Identification Numbers Agency NoticesFederal Communications Commission Notice Mouse Compliance Statement ModificationsCables Avis Canadien Canadian NoticeJapanese Notice Energy Star Compliance European Union NoticeGerman Ergonomics Notice Cdrh Regulations Laser SafetyCompliance with International Regulations Laser Information Laser Product LabelBattery Replacement Notice Index Index-2