Compaq D300v Series manual To boot one time from a device other than

Setup Utility (Intel Celeron Models)

Computer Setup (Continued)

Heading	Option	Description
Storage	Boot Order	Allows you to specify the order in which
(continued)		attached peripheral devices (such as diskette
		drive, hard drive, CD-ROM, or network
		interface card) are checked for a bootable
		operating system image. Each device on the
		list may be individually excluded from or
		included for consideration as a bootable
		operating system source. For systems with
		more than one attached diskette or disk drive,
		a submenu allows you to specify the order in
		which the devices are assigned drive letters.
		MS-DOS drive lettering assignments
		may not apply after a non-MS-DOS
		operating system has started.
		To boot one time from a device other than the
		default device specified in Boot Order, restart
		the computer and press F9 when the F10 =
		Setup message appears on the screen. When
		POST is completed, a list of bootable devices
		is displayed. Use the arrow keys to select a
		device and press the Enterkey.
Security	Setup Password	Allows you to set and enable setup
		(administrator) password.
		If the setup password is set, it is
		required to change Computer Setup
		options, flash the ROM, and make
		changes to certain plug and play settings
		under Windows. Also, this password
		must be set in order to use some
		Compaq remote security tools.
	Power-On Password	Allows you to set and enable power-on
		password.

Support for Computer Setup options may vary depending on your specific hardware configuration.

Compaq Evo D300v User’s Guide 4-9