Epson TM-S1000 Selectable processes, High-speed mode Confirmation mode, Franking process

Selectable processes

The following processes can be set with the application for both the multi feed models and single feed models.

• Franking process

•With franking

•Without franking

• Ejection process

•Ejects documents to the Main pocket

•Ejects documents to the Sub pocket (except for the one pocket model)

•Does not eject documents

•Waterfall (except for the one pocket model)

• Electric endorse

•With electric endorse

•Without electric endorse

Each process is performed based on the parameters shown below.

	High-speed mode		Confirmation mode
	• Double feeding detection result	•	Double feeding detection result
	• Incorrect insertion detection result	•	Incorrect insertion detection result
Franking process	• External noise detection result	•	External noise detection result
		• Magnetic waveform detection result
		• MICR “?” detection result
		•	IQA result
	• Double feeding detection result	•	Double feeding detection result
	• Incorrect insertion detection result	•	Incorrect insertion detection result
Ejection process	• External noise detection result	•	External noise detection result
		• Magnetic waveform detection result
		• MICR “?” detection result
		•	IQA result
	• Double feeding detection result	•	Double feeding detection result
	• Incorrect insertion detection result	•	Incorrect insertion detection result
Electric endorse	• External noise detection result	•	External noise detection result
	• Magnetic waveform detection result	•	Magnetic waveform detection result
	• MICR “?” detection result	•	MICR “?” detection result
	• IQA result	•	IQA result

•If the waterfall function is enabled with the driver, the setting of the ejection process is

ignored. When the ejection pocket is near-full, the documents are automatically ejected to the other pocket.

•The multi feed models detect a double feeding with the paper length sensor and paper thickness sensor. The single feed models detect a double feeding only with the paper length sensor when a more than 240 mm length document is detected in the paper path.

22