Epson TM-S1000 specifications Error LED flash code Error description

		Error LED flash code
Error	Error description			Approx.320 ms	Recovery measure
			Approx.5120ms
Paper jam error	• After initialization,				Remove the paper
	paper detected				and call BiCancelError
	before the CIS.				of the TM-S1000 API or
					turn off/on the power.
	• Paper jam.				Remove the jammed
	(Paper length sensor,				paper and call
	middle sensor, franking				BiCancelError of the
	sensor, or ejection				TM-S1000 API or turn
	sensors detected				off/on the power.
	paper feed error.)

•ASF/SF failed in feeding paper.

	• Too short/long paper	Remove the paper left
	detected.	in the paper path and
		call BiCancelError of
		the TM-S1000 API or
		turn off/on the power.
	• Cover opened during	If the paper is left in the
	paper feeding.	paper path, remove it
		and call BiCancelError
		of the TM-S1000 API
		with covers closed or
		turn off/on the power.
Reading error	When any of the	Open the franker
(Only when the	following errors occurs in	cover, remove the
scanner is set to	the high-speed mode.	paper, and call
stop the	• A double feeding	BiCancelError of the
document at the	detected.	TM-S1000 API or turn
franking position	• Other than “Check	off/on the power.
instead of	was correctly inserted.”
ejecting it into a	detected.
pocket if a	• External noise
reading error
	detected.
occurs.)
	When an application
	judges an error in the
	confirmation mode.

The error recovery command is valid only if a recoverable error (excluding automatically recoverable errors) occurs.

28