Epson TM-S1000 specifications Scannable Area, Front, Back

Page 34

•The paper sensors ignore the range indicated in the figure below for the guide holes in

fan-folded paper.

Diameter: 6 mm or less

Scannable Area

	Image scanning may not be possible in the area a, b, and c in the figures below.
		Image length: Max.269.5
		No. 12345
	pay to	$
	pay to	<Front>
		<Front>
	the order of	Image height: Max.102.6
		Dollars
	MICR character	c=3.0
	MICR character
		Paper inserting direction
	b=10.0	a=10.0

Image length: Max.269.5

<Back>

	c=3.0
b=10.0	Paper inserting direction
b=10.0	a=10.0

Image height: Max.102.6

[Units: mm]

Note: Values are typical.

34

Image 34

Contents Handling SetupProduct Overview 411259105 Rev. ETrademarks For Safety Key to SymbolsDealer or a Seiko Epson service center for advice About this Manual Manual ContentRestriction of Use Aim of the ManualContents Connecting the Scanner to the Host Computer Application Development InformationPage Standard Equipment FeaturesSingle Pass Processing Easy OperationFranking Cartridge Interface Product ConfigurationColor Attachments AccessoriesOptions For Multi Feed Models Part Names and FunctionsFor Single Feed Models Power Switch Cover Power SwitchFor All Models Power LED Green LED IndicatorsError LED Orange Document LED Green ConnectorsOffline Confirmation Processing ModesHigh-speed OverlapProcessing speed For 30 Dpm ModelFor 60 Dpm Model With overlap ConfirmationFor 90 Dpm Model Reading Operation Franking process High-speed mode Confirmation modeSelectable processes Ejection processSensors Paper SensorsCover Open Sensors Eject sensor EMain pocket nearly full sensor F Scanner cover open sensor HFranking cartridge position sensor K Other SensorsFranking cartridge sensor J Hopper position sensor MMaintenance Counter Counter Counter type UnitError LED flash code Error description Error StatusRecoverable Errors Recovery measureError LED flash code Error description Error Error description Unrecoverable ErrorsError LED flash code Compatibility with the TM-J9000/J9100Product Specifications CPUDpm documents per minute, dpi dots per inch 25.4 mm Scanner Specifications JpegPaper Specifications For multi feed models FrontFront Scannable AreaBack Area for Franking Micr Readable AreaArea for Electric Endorsement Front or BackElectrical Characteristics Environmental ConditionsExternal Dimensions and Mass MassPage Installing the Scanner Flow of SetupImportant Notes on Installation Connecting the Scanner to the Host Computer Connecting the Power Supply Unit Use the AC adapter. C as the power supply unitPage Download Software and ManualsSoftware Description Manual TM-S1000 Utility Functions of the UtilityHandling Turning On/OffOpening the Covers Opening the Scanner CoverOpening the Franker Cover Franking Cartridge Installing and Replacing the Franking CartridgeImportant Notes on the Franking Cartridge Handling Pocket Guide Pulling Out the GuidesASF/SF Guide Flow of Single Pass Processing Processing DocumentsImportant Notes on Processing Documents Inserting Checks For multi feed modelsFor single feed models When the documents are ejected, remove the documents Ejecting ChecksCleaning Cleaning the Image ScannerCleaning the Micr Unit Do not use sticky cleaning sheetsRemoving a Paper Jam Preparing for Transport