Epson TM-S1000 specifications Cleaning the Micr Unit, Do not use sticky cleaning sheets

Page 56

Cleaning the MICR Unit

Dirt on the MICR unit may cause frequent magnetic character reading errors. Clean the MICR unit every 6 months or every 100,000 passes.

Use the self-test tool in the CD-ROM included with the scanner or your application to clean the MICR unit.

Use KIC Products "Waffletechnology cleaning card (Part No. KW2663-CS1B15WS EPSON CAPTURE ONE WAFFLE WS CLEANING CARDS 15/BOX)."

Do not use sticky cleaning sheets.

They may cause a paper jam or machine failure.

CAUTION Be sure to dispose of used cleaning sheets.

For detailed information on cleaning procedures, see the manuals for the self-test tool or

your application.

It is recommended to clean the MICR unit once per week or once every 2,000 checks for good reading results.

It is recommended to clean the image scanner after cleaning the MICR unit. (See "Cleaning the Image Scanner" on page 55.)

56

Image 56
Contents Setup Product OverviewHandling 411259105 Rev. ETrademarks For Safety Key to SymbolsDealer or a Seiko Epson service center for advice Manual Content Restriction of UseAbout this Manual Aim of the ManualContents Connecting the Scanner to the Host Computer Application Development InformationPage Features Single Pass ProcessingStandard Equipment Easy OperationFranking Cartridge Color Product ConfigurationInterface Options AccessoriesAttachments For Single Feed Models Part Names and FunctionsFor Multi Feed Models For All Models Power SwitchPower Switch Cover Error LED Orange LED IndicatorsPower LED Green Offline ConnectorsDocument LED Green Processing Modes High-speedConfirmation OverlapProcessing speed For 30 Dpm ModelFor 60 Dpm Model With overlap ConfirmationFor 90 Dpm Model Reading Operation High-speed mode Confirmation mode Selectable processesFranking process Ejection processSensors Paper SensorsEject sensor E Main pocket nearly full sensor FCover Open Sensors Scanner cover open sensor HOther Sensors Franking cartridge sensor JFranking cartridge position sensor K Hopper position sensor MMaintenance Counter Counter Counter type UnitError Status Recoverable ErrorsError LED flash code Error description Recovery measureError LED flash code Error description Unrecoverable Errors Error LED flash codeError Error description Compatibility with the TM-J9000/J9100Product Specifications CPUDpm documents per minute, dpi dots per inch 25.4 mm Scanner Specifications JpegPaper Specifications For multi feed models FrontBack Scannable AreaFront Micr Readable Area Area for Electric EndorsementArea for Franking Front or BackElectrical Characteristics Environmental ConditionsExternal Dimensions and Mass MassPage Important Notes on Installation Flow of SetupInstalling the Scanner Connecting the Scanner to the Host Computer Connecting the Power Supply Unit Use the AC adapter. C as the power supply unitPage Software Description Manual Software and ManualsDownload TM-S1000 Utility Functions of the UtilityHandling Turning On/OffOpening the Covers Opening the Scanner CoverOpening the Franker Cover Important Notes on the Franking Cartridge Installing and Replacing the Franking CartridgeFranking Cartridge Handling ASF/SF Guide Pulling Out the GuidesPocket Guide Important Notes on Processing Documents Processing DocumentsFlow of Single Pass Processing Inserting Checks For multi feed modelsFor single feed models When the documents are ejected, remove the documents Ejecting ChecksCleaning Cleaning the Image ScannerCleaning the Micr Unit Do not use sticky cleaning sheetsRemoving a Paper Jam Preparing for Transport