Epson TM-S1000 specifications Important Notes on the Franking Cartridge

Page 48

Franking Cartridge

Important Notes on the Franking Cartridge

Keep the franking cartridges out of the reach of children.

Do not disassemble franking cartridges.

Be careful during handling because the ink can permanently stain clothing.

Seiko Epson recommends using genuine Epson cartridges for your scanner. Products of other manufacturers may adversely affect the scanner and printing quality, and may result in the scanner not being able to achieve the specified performance levels.

Do not remove the franking cartridge from the packing box until immediately before its installation. Leaving the cartridge out of its packing for a prolonged period of time may adversely affect printing quality.

Use up the franking cartridge within 18 months from the date of production indicated on the cartridge box.

Dispose of the franking ordinances, and regulatio

cartridge in accordance with any relevant national or local laws, ns.

Installing and Replacing the Franking Cartridge

Follow these steps to install a franking cartridge for the first time or to replace it.

1

2

Open the franker cover.

(See "Opening the Franker Cover" on page 47.)

If a used franking cartridge is installed, hold the knob at the top of the cartridge and lift the cartridge out of the scanner.

Franking cartridge

48

Image 48
Contents Setup Product OverviewHandling 411259105 Rev. ETrademarks For Safety Key to SymbolsDealer or a Seiko Epson service center for advice Manual Content Restriction of UseAbout this Manual Aim of the ManualContents Connecting the Scanner to the Host Computer Application Development InformationPage Features Single Pass ProcessingStandard Equipment Easy OperationFranking Cartridge Product Configuration InterfaceColor Accessories AttachmentsOptions Part Names and Functions For Multi Feed ModelsFor Single Feed Models Power Switch Power Switch CoverFor All Models LED Indicators Power LED GreenError LED Orange Connectors Document LED GreenOffline Processing Modes High-speedConfirmation OverlapProcessing speed For 30 Dpm ModelFor 60 Dpm Model With overlap ConfirmationFor 90 Dpm Model Reading Operation High-speed mode Confirmation mode Selectable processesFranking process Ejection processSensors Paper SensorsEject sensor E Main pocket nearly full sensor FCover Open Sensors Scanner cover open sensor HOther Sensors Franking cartridge sensor JFranking cartridge position sensor K Hopper position sensor MMaintenance Counter Counter Counter type UnitError Status Recoverable ErrorsError LED flash code Error description Recovery measureError LED flash code Error description Unrecoverable Errors Error LED flash codeError Error description Compatibility with the TM-J9000/J9100Product Specifications CPUDpm documents per minute, dpi dots per inch 25.4 mm Scanner Specifications JpegPaper Specifications For multi feed models FrontScannable Area FrontBack Micr Readable Area Area for Electric EndorsementArea for Franking Front or BackElectrical Characteristics Environmental ConditionsExternal Dimensions and Mass MassPage Flow of Setup Installing the ScannerImportant Notes on Installation Connecting the Scanner to the Host Computer Connecting the Power Supply Unit Use the AC adapter. C as the power supply unitPage Software and Manuals DownloadSoftware Description Manual TM-S1000 Utility Functions of the UtilityHandling Turning On/OffOpening the Covers Opening the Scanner CoverOpening the Franker Cover Installing and Replacing the Franking Cartridge Franking CartridgeImportant Notes on the Franking Cartridge Handling Pulling Out the Guides Pocket GuideASF/SF Guide Processing Documents Flow of Single Pass ProcessingImportant Notes on Processing Documents Inserting Checks For multi feed modelsFor single feed models When the documents are ejected, remove the documents Ejecting ChecksCleaning Cleaning the Image ScannerCleaning the Micr Unit Do not use sticky cleaning sheetsRemoving a Paper Jam Preparing for Transport