Metrologic Instruments MS6130 MX003 manual MX003 Series Scanner Interfaces

MX003 SERIES SCANNER INTERFACES

Metrologic’s MX003 Series Scanner Interfaces provide a short range, one- way wireless data communication link between a remote portable scanner and an RS-232 or light pen host device. Specifically, Metrologic’s MS6130 Hand-Held Laser Scanners include a Liberty® RF transmitter board.

Metrologic’s MS700i/MS720i series scanners, TECH series scanners may

be connected to a MX Series scanner interface. The “MX” scanner interface includes a RF receiver and a digital interface board.

The MS6130 scanner provides two functions:

∙Scans and decodes bar codes

∙Transmits scanned data to the RF receiver or “MX”

When the “MX” interface is connected to aScanPal® or host device such as a portable data terminal (PDT), it provides two functions

(For example, refer to Figure 1):

∙Performs the RF receiver function; for example, beeps to show it has received data from the transmitter

∙Communicates with the host device

In this manual, MX003 series scanner interfaces may be referred to as the “MX”, “MX” interface or receiver. Suffix of the MX003 model designation will vary due to country of usage.

Any RS-232C or	MS6130 with Liberty® RF
Light Pen Device with	Scanner Interface (Transmitter)
MX003 RF Receiver

Up to 30 Ft.

(conditions permitting)

Figure 1

2