Canon FB630U/FB636U manual Saving Scanned Images, To Save an Image

Page 32

S T E P 2

Saving Scanned Images

After an image has been scanned, the data should be saved in a file to a disk using Canon Photo.

To Save an Image

After the scan is complete, save the image in Canon Photo.

Specify the folder and file name that you wish to use for the image in the Save this document as: dialog box.

Click the [Save] button.

•The final scan will start. When the scan is completed, the image will be saved and its thumbnail will display in the [My Photos] window.

32

Image 32

Contents User’s Guide This page intentionally left blank About the Conventions Used in this Guide How to Use this GuideWhere to Look Table of Contents Appendices Control Panel Features Scanning Procedures E PPlug-in Module CS-U Special Features See the Results of Adjustments Immediately Dynamic PreviewGamma Curve Adjusts Image Brightness Supports ColorSync 2.0 or higher Auto Tone CorrectionInstalling Plug-in Module CS-U Quick Start InstructionsStart Plug-in Module CS-U Start the Preview ScanSet the preferences, magnification and scan mode settings Specify the Area of the Image to be Scanned pClick the Browser button Select the area to be scanned by clicking and draggingScan the Image p Click the Scan buttonSave the image with the application software, specifying a Folder, file name and file formatE P Display Plug-in Module CS-U Control Panel E PE P Operating Procedures Canon PhotoClick the Preview button PreviewingSet the original on the scanner document glass Set Preferences UnitE P Setting Basic Resolution Preview Window Settings Dialog Box E P Preview Window SizeReturn to Default Settings ProceduresE P Calibration Select the Prefs menu in the control panelOutput Device Resolution= 360 dpi, Magnification= 100% Set MagnificationE P To Set the Magnification Factor Set the desired magnification factor on the control panelSet Scan Mode Black & WhiteDiffusion Dither GrayscaleColor High Definition ColorTo Set the Scan Mode Select the scan mode that you wantVerify Image Before Scanning To Verify the ImageE P Scanning Scan Area Settings Position the pointer in the preview windowSelect the area you want to enlarge with the zoom function ZoomingTo Zoom Click the Zoom In button To return to normal view, click the Zoom Out buttonSpecify the Scan Area ScanningTo Initiate the Scan Saving Scanned Images To Save an ImageColor/High Definition Mode Grayscale ModeBlack & White Mode Diffusion DitherHow to Adjust Histograms Using the Histogram Feature to Adjust Image ContrastHow to Interpret Histograms E P To Adjust a Histogram Click the Histogram buttonClick the Auto button Click the OK buttonAdjusting the Image with Gamma Settings Setting the GammaGamma = GammaBrightness Brightness and Contrast SettingsContrast E P To Adjust the Brightness and Contrast Click the Gamma buttonAdjusting Gamma with the Menu CRT Type aCRT Type B CRT Type CE P To Change the Gamma Value Settings Click the radio button for Menu SettingSending Output to a Printer Gamma Value SettingsAdjusting the Gamma Value to Match the Display Slider Tone Curve Settings Manipulating the GraphE P To Edit the Tone Curve Auto Tone Correction ColorSync To Activate the ColorSync FunctionOpen the Image menu and select Descreen ProcedureDescreen To Set the Threshold Value Set the threshold value in the Control PanelSaving / Recalling Settings To Save Settings in a Settings FileE P To Recall a Settings File Editing Scanned Images Many special effects may be achieved with filtersScanning Techniques Matching Scan Resolution to PurposeOptical and Enhanced Resolutions System Requirements SpecificationsFunctional Specifications Clicked on the Plug-in Module CS-U control panel TroubleshootingProblem Scan button cannot be selected Error Messages Error MessageCause ResponseGlossary Resolution Image FilePreview ScannerIndex P E N D I C E S Canon Customer Care Center Mail support via Canon Computer Systems, IncOE-030AA 0799 CDS Canon Inc