Canon FB630U/FB636U manual Verify Image Before Scanning, To Verify the Image

Page 25

S T E P 1

Verify Image Before Scanning

Before initiating the final scan, it is advisable to check the intended results with the Browser function. The image in the Browser window is more accurate than the one in the Preview window, allowing you to verify the results more precisely before scanning.

To Verify the Image

Set the magnification and scan mode to the appropriate settings (pp. 20-24).

Click the [Browser] button.

•The Selection Frame will appear on the Preview window to enable a portion of the image to be selected.

•The size and shape of the Selection Frame cannot be changed because it is automatically determined by the scanning resolution setting.

Hint

The Browser button is disabled when the image area is unspecified or is too small (less than approximately 64 x 64 pixels).

Move the pointer in the selection frame inside the preview window.

• The mouse cursor will change to a “+” sign shape.

Move the Selection Frame to the desired position with the mouse cursor.

• Moving the mouse will move the Selection Frame.

25

Image 25

Contents User’s Guide This page intentionally left blank Where to Look How to Use this GuideAbout the Conventions Used in this Guide Table of Contents Appendices Control Panel Features E P Scanning ProceduresSee the Results of Adjustments Immediately Dynamic Preview Plug-in Module CS-U Special FeaturesGamma Curve Adjusts Image Brightness Supports ColorSync 2.0 or higher Auto Tone CorrectionQuick Start Instructions Installing Plug-in Module CS-UStart Plug-in Module CS-U Start the Preview ScanSpecify the Area of the Image to be Scanned p Set the preferences, magnification and scan mode settingsClick the Browser button Select the area to be scanned by clicking and draggingClick the Scan button Scan the Image pSave the image with the application software, specifying a Folder, file name and file formatE P E P Display Plug-in Module CS-U Control PanelCanon Photo E P Operating ProceduresSet the original on the scanner document glass PreviewingClick the Preview button Unit Set PreferencesE P Setting Basic Resolution E P Preview Window Size Preview Window Settings Dialog BoxProcedures Return to Default SettingsE P Calibration Select the Prefs menu in the control panelSet Magnification Output Device Resolution= 360 dpi, Magnification= 100%Set the desired magnification factor on the control panel E P To Set the Magnification FactorBlack & White Set Scan ModeDiffusion Dither GrayscaleHigh Definition Color ColorSelect the scan mode that you want To Set the Scan ModeTo Verify the Image Verify Image Before ScanningE P Scanning Position the pointer in the preview window Scan Area SettingsTo Zoom ZoomingSelect the area you want to enlarge with the zoom function To return to normal view, click the Zoom Out button Click the Zoom In buttonTo Initiate the Scan ScanningSpecify the Scan Area To Save an Image Saving Scanned ImagesGrayscale Mode Color/High Definition ModeBlack & White Mode Diffusion DitherHow to Interpret Histograms Using the Histogram Feature to Adjust Image ContrastHow to Adjust Histograms Click the Histogram button E P To Adjust a HistogramClick the Auto button Click the OK buttonSetting the Gamma Adjusting the Image with Gamma SettingsGamma Gamma =Contrast Brightness and Contrast SettingsBrightness Click the Gamma button E P To Adjust the Brightness and ContrastCRT Type a Adjusting Gamma with the MenuCRT Type B CRT Type CClick the radio button for Menu Setting E P To Change the Gamma Value SettingsAdjusting the Gamma Value to Match the Display Gamma Value SettingsSending Output to a Printer Slider Manipulating the Graph Tone Curve SettingsE P To Edit the Tone Curve To Activate the ColorSync Function Auto Tone Correction ColorSyncDescreen ProcedureOpen the Image menu and select Descreen Set the threshold value in the Control Panel To Set the Threshold ValueTo Save Settings in a Settings File Saving / Recalling SettingsE P To Recall a Settings File Many special effects may be achieved with filters Editing Scanned ImagesOptical and Enhanced Resolutions Matching Scan Resolution to PurposeScanning Techniques Functional Specifications SpecificationsSystem Requirements Problem TroubleshootingClicked on the Plug-in Module CS-U control panel Scan button cannot be selected Error Message Error MessagesCause ResponseGlossary Image File ResolutionPreview ScannerIndex P E N D I C E S Mail support via Canon Computer Systems, Inc Canon Customer Care CenterOE-030AA 0799 CDS Canon Inc