Datalogic Scanning PDA user manual Select Manual or Dhcp, For the update to run

RF Connection

Figure 24. FMU Client Settings - RF

A

B

Enable FMU	Check to enable the terminal to work with FMU.
Client
Connection	Select Network.
Discovery	Select Manual or DHCP.
IP Address	Enter the server name or IP address.
Group Name	Enter a group name, or leave blank for the Default group.
Update Time	Select a time from the 24-hour clock to indicate when the terminal will
	attempt to contact the FMU Server. The terminal must be ON in order
	for the update to run.

An alarm can be set to wake the terminal at the scheduled update time.

User’s Manual 53