Terminal to FMU Server Communications
Figure 26. Terminal Updater prompt
If the operator taps Yes, the terminal will be immediately updated.
Scheduled Update Time
A second option is available only on the terminal itself. This option is config- urable from the Falcon Config application on the terminal. See “Enabling Ter- minals for RF Connectivity” on page 52.
If an update was scheduled on the terminal, the FMU client on the terminal will automatically trigger an update within the specified hour. The terminal needs to be on in order for the update to proceed. It is advised that the unit be left in its Datalogic Dock if unattended.
Terminal Configuration Settings
For diagnostic purposes, you can display an individual terminal’s configuration settings. This view is similar to the group configuration view; however, the data within this view reflects settings on the selected terminal.
Since terminal settings are superseded by group settings, the next time the terminal is updated the defined group settings will be applied, overwriting changes made with Terminal Configuration.
On units with Direct Connection, wait until the FMU Update or Mgmt. Utility Client dialog on the terminal indicates ‘Idle’ mode before selecting this option.
To access terminal configuration settings:
1.Expand the view of the terminal you want to configure by clicking on the plus sign (+) to the left of the terminal.
56 | Falcon® Management Utility (FMU) |