Getting Started
LED and Beeper Indicators
The scanner’s beeper sounds and its green LED illuminates to indicate various functions or errors on the scanner. The tables below list these indications. One exception to the behaviors listed in the tables is that the scanner’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the
Green LED Indications
LED | INDICATION |
| COMMENT |
INDICATION |
| ||
|
|
| |
|
|
|
|
|
|
|
|
Bright green flash |
| Indicates the scanner has finished all its power up tests and is | |
indication |
| now ready for ooperation. | |
|
| ||
|
|
|
|
Good Read | Bright green flash |
| Indicates a bar code has been read and decoded. |
Indication |
| ||
|
|
| |
|
|
|
|
Scanner Ready | Constant dim green |
| The scanner is ready for operation. |
|
|
|
|
| Constant green flash |
| The scanner is in Sleep Mode. To wake the scanner up, move |
Sleep Mode |
| an object in front of its window or press the button atop the | |
(100mS on, 1900mS off) |
| ||
|
| unit. | |
|
|
| |
|
|
|
|
Host Disable | Constant green flash at 1 Hz |
| The scanner is disabled due to receiving a disble command |
(100mS on, 900mS off) |
| from the POS terminal. | |
|
| ||
|
|
|
|
Diagnostics | Varies (see "Error Codes" on |
| The LED can provide diagnostic feedback if the scanner dis- |
page |
| covers a problem during SelfTest. | |
|
| ||
|
|
|
|
BEEPER FUNCTIONS |
|
| |
|
|
|
|
BEEPER | INDICATION |
| COMMENT |
INDICATION |
| ||
|
|
| |
|
|
|
|
|
|
|
|
|
|
| The |
Power On Beep | Single beep |
| can be enabled or disabled. When enabled, this beep Indi- |
| cates the scanner has finished all its power up tests and is | ||
|
|
| |
|
|
| now ready for operation. |
|
|
|
|
Good Read |
|
| The good read beep indication is configurable. Options |
Single beep |
| include: Enable/disable, frequency, duration and volume. See | |
Indication |
| ||
|
| the Product Reference Guide (PRG) for more information. | |
|
|
| |
|
|
|
|
Diagnostics | Varies (see "Error Codes" on |
| The Beeper can provide diagnostic feedback if the scanner |
page |
| discovers a problem during SelfTest. | |
|
| ||
|
|
|
|
Programming | Varies (see the Product Reference |
| The Beeper will sound as programming bar code labels are |
Mode | Guide for more information about |
| |
| scanned, indicating progress during scanner configuration. | ||
Indications | scanner programming) |
| |
|
| ||
|
|
|
|
Magellan® 1000i |