Datalogic Scanning 1000I manual Codabar Length 1, Length 2 Programming Instructions, Quiet Zones

Symbologies

Codabar — continued

Codabar Length 1, Length 2 Programming Instructions

1.Scan the START bar code.

2.Scan either the Set Length 1 or Set Length 2 bar code.

3.Turn to Appendix C, Alpha-Numeric Pad and scan the three digits (zero padded) represent- ing the length in decimal notation.

For Codabar bar codes, all start, stop, check and data characters are included in the length calculations.

NOTE

4. Scan the END bar code.

START / END

PROGRAMMING BARCODES

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 003

Set Length 2

DEFAULT SETTING FOR THIS FEATURE: 050

Quiet Zones

This feature enable/disables the requirement that quiet zones must be present for Codabar bar codes.

START / END

PROGRAMMING BARCODES

Don’t require Quiet Zones

DEFAULT

Require Quiet Zones

5-44 Magellan® 1000i