Planar UltraRes User Manual
Bottom Half Frame Delay
Frame Display
With some quadrant sources, the top and bottom halves of display can show frame tearing, at a delay of one frame per second. If you see frame tearing, use the
andsliders to compensate.
Top Half
Changing Backlight Intensity
Changing Backlight Intensity
To change the brightness of the display, use the Backlight slider on the Display tab. If you want a brighter display, move the slider towards a higher number. If you want to conserve power and increase backlight life, move the slider towards a lower number.
Turning Local Dimming On or Off
Local Dimming allows the LED edge lighting to dynamically adjust based on the source content. Turning this feature on shows darker black levels, which in turn has a higher contrast ratio.
Changing Frame Delay
47