BenQ SP890 Utilizing the password function, Setting a password, If you forget the password

Page 23

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up password security. The password can be set through the On-Screen Display (OSD) menu. Once the password is set and this function is selected, the projector is password-protected. Users who do not know the correct password can not use the projector.

You will be inconvenienced if you activate the password functionality and subsequently forget the password. Print out this manual (if necessary) and write the password you used in this manual, and keep the manual in a safe place for later recall.

Setting a password

Once a password has been set and activated, the projector cannot be used unless the correct password is entered every time the projector is started.

English

1.Press MENU on the projector or MENU/EXIT on the remote control and then press / until the Advanced Setup menu is highlighted.

2.Press to highlight Password and press ENTER. The Password page is displayed.

3.Highlight Password and press / to select On. The Input Password page is displayed.

4.As the picture indicates, the four arrow keys ( , , , ) respectively represent 4 digits (1, 2, 3, 4). According to the password you desire to set, press the arrow keys on the remote control or projector to enter six digits for the password.

If the function is used for the first time, enter the default password (1, 1, 1, 1, 1, 1) of the projector by pressing the arrow key six times. Once the password is set, the OSD menu returns to the Password page.

IMPORTANT: The digits being input will be displayed as asterisks on- screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __ __

5.To leave the OSD menu, press MENU on the projector or MENU/ EXIT on the remote control.

Advanced Setup

Lamp Settings

HDMI Settings

 

Baud Rate

115200

Test Pattern

 

High Altitude Mode

Off

Audio Settings

 

 

 

Password

ENTER

Lan Control Settings

 

Reset All Settings

 

Expert Mode

 

Direct Power On

Off

S-Video

EXIT Back

Password

Password

On

Change Password

 

 

EXIT Back

Input Password

EXIT Clear

If you forget the password

If the password function is activated, you will be asked to enter the six-digit password every time you turn on the projector. If you enter the wrong password, the password error message is displayed lasting for three seconds, and the Input Password page follows. You can retry by entering another six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 24 for details.

If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time.

Using the projector

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Welcome Table of contents Important safety instructions Do not cover the projector with any item Disposal Moisture condensationAvoid volatile liquids Overview Shipping contentsCeiling mounting the projector Remote control batteriesRemote control operation Projector features Under view Projector exterior viewFront and upper side view Rear viewControl panel Remote control Floor Rear Choosing a locationFloor Front Ceiling FrontObtaining a preferred projected image size Installation for a 169 ratio screen Projection dimensionsHeight H Installation for a 43 ratio screenHighest LensTo use the lens shift lever Shifting the projection lensComponent Connecting Hdmi devicesPreparations Reference Picture qualityConnecting S-Video or video devices Connecting component-video devicesConnect the projector to a computer with a VGA cable Connecting a computerConnecting a monitor Preparations Turning the projector onChanging Color Space Using the OSD menuSelecting an input source Securing the projector Using the menusUsing a security cable lock Use / to highlight the System Setup menuIf you forget the password Utilizing the password functionSetting a password Disabling the password function Entering the password recall procedureChanging the password Fine-tuning the image size and clarity Adjusting the projected imageAdjusting the projection angle Auto-adjusting the imageNo parallel sides Correcting picture distortionTwo parallel sides To fine-tune the picture mode Using the preset and user modesSelecting a preset mode Fine-tuning the selected picture modeTo reset the picture mode to the preset factory values Setting the User 1/User 2 modeResetting the picture mode Press to highlight Load Settings FromFine-tuning the picture quality Controlling image clarity Setting Black LevelSelecting a color temperature Advanced picture quality controlsTo set a preferred color temperature Setting a preferred color temperatureSelecting a Gamma setting Adjusting Brilliant ColorColor Management Setting Film ModeTo adjust and store the settings About the aspect ratio Setting 3D Comb FilterSelecting the aspect ratio 169 display Using Panamorph lenses optionalImage Using the entire resolution Aspect ratio Aspect ratio imageFreezing the image Utilizing FAQ functionDisable Hiding the imageMuting the sound Adjusting the soundAdjusting the sound level Turning off the Power On/Off Ring ToneIf you are in a Dhcp environment Configuring the Lan Control SettingsControlling the projector through a Lan environment Controlling the projector remotely through a web browserPress Exit to go back to the remote network operation Ii To switch input source, click on your desired signalAuto Source Menu itemOperating in a high altitude environment To activate High Altitude ModePress to highlight High Altitude Mode PIP function is effective at below source combinations Displaying more than one image source simultaneouslyTo display the PIP window Highlight PIP and press / to select OnTurning the projector off Main menu Sub-menu Options On-Screen Display OSD menusOn-Screen Display OSD structure Display System SetupInformation SetupFunction Description Picture -- Basic menuPicture -- Advanced menu Display menu Language Sleep TimerMenu Settings Menu Position Closed Caption EnableAdvanced Setup menu Information menu Storing the projector Cleaning the lensCleaning the projector case Care of the projectorGetting to know the lamp hour Setting Lamp Power as EconomicSetting Auto Off Lamp informationStatus Message Timing of replacing the lampReplacing the lamp Reapply power and turn the projector back on Resetting the lamp timer Power Temp Lamp Status & Description IndicatorsProblem Cause Remedy TroubleshootingTerminals SpecificationsOptical ElectricalMm x 318 mm x 169 mm W x D x H DimensionsKHz MHz Timing chartFormat Resolution Refresh rate Frequency Supported timing for PC inputSupported timing for Video and S-Video inputs Format Resolution Refresh rate Hz Freq. KHz Pixel Freq. MHzFormat Resolution Refresh rate Freq. KHz Pixel Freq MHz Supported timing for Edtv and Hdtv via Component inputsDisclaimer WarrantyCopyright Weee directive FCC statement for United States usersEEC statement for European users MIC statementEnglish
Top Page Image Contents