●BLK LEN. (block length): * For the PORT Label Type mode: 0.80" to 8.00" (20 to 200 mm) Default: 1.20" (30 mm)
*For the PANEL Label Type mode: 0.25" to 8.00" (6 to 200 mm) Default: 1.20" (30 mm)
● FRAME: | * For the PORT Label Type mode: |
| ||||
| OFF, 1 |
| , 2 |
| , 3 | , 4 |
|
|
| ||||
| Default: OFF |
|
|
|
|
*For the PANEL Label Type mode:
| OFF, 1 |
|
| , 2 |
|
|
| , 3 |
|
| , | ||||
| 4 |
|
|
| , 5 |
|
|
| , 6 |
| , |
|
| ||
| 7 |
|
|
| , 8 |
|
|
| , 9 |
|
|
|
| ||
| Default: OFF |
|
|
|
|
|
| ||||||||
● PRINT (print order): | FRONT, REVERSE |
|
|
|
|
|
| ||||||||
| Default: FRONT |
|
|
|
|
|
|
☞For these types of labels, we recommend using Extra Strength Adhesive Tape.
☞The PRINT parameter is only available with the PANEL Label Type mode.
☞Using the Numbering function with the PANEL Label Type mode makes it easy to create a single label of multiple blocks containing incremental characters, which can be used, for example, to label patch panels as shown above.
1Choose Label Type PANEL.
2Type in one block of text.
3Use the numbering function under g a to choose the corresponding field to be incremented and the number of sequential labels to be printed.
Label Type Modes
13